Mains supply options |
ProfLine 2115-208 |
ProfLine 2115-400 |
System contents |
NSG 1007-15-208 Power source |
NSG 1007-15-400 Power source |
CCN 1000-3 3-phase |
CCN 1000-3 3-phase |
Coupling unit |
Coupling unit |
DAQ card |
DAQ card |
Interface cable |
Interface cable |
WIN 2100 H&F test software |
WIN 2100 H&F test software |
WIN 2110 PQT test software |
WIN 2110 PQT test software |
Pre-configured PC |
Pre-configured PC |
USB cable |
USB cable |
Power source (for full specification see separate datasheet) |
Power output (AC mode) |
3 x 5,000 VA |
3 x 5,000 VA |
Voltage AC, two ranges |
0-150 V and 0-300 V |
0-150 V and 0-300 V |
Maximum current (low range) |
37.0 Amps/phase, 110 Amps
peak repetitive |
37.0 Amps/phase, 110 Amps
peak repetitive |
Maximum current (high range) |
18.5 Amps/phase, 96 Amps
peak repetitive |
18.5 Amps/phase, 96 Amps
peak repetitive |
Frequency range (AC mode) |
16 - 1000 Hz |
16 - 1000 Hz |
Power output (DC mode) |
3,500 watts/phase |
3,500 watts/phase |
Voltage DC, two ranges |
0-200 V and 0-400 V |
0-200 V and 0-400 V |
Maximum current (low range) |
26.0 Amps |
26.0 Amps |
Maximum current (high range) |
13.0 Amps |
13.0 Amps |
Supply 3-phase, |
208 Vac L-L, 50/60Hz 3-phase, |
400 Vac L-L, 50/60Hz |
Dimensions (per chassis) |
178 x 483 x 610 mm |
178 x 483 x 610 mm |
Weight (per chassis) |
28 kg |
28 kg |
Coupling unit |
Number of phases |
3 |
3 |
Measurement channels |
4 |
4 |
EUT connector: Rear panel |
Terminal block |
Terminal block |
Maximum voltage |
300 Vac |
300 Vac |
Maximum current |
40 Arms (200 A Pk for 10 ms) |
40 Arms (200 A Pk for 10 ms) |
Supply power: Voltage |
115/230 Vac +/- 10% |
115/230 Vac +/- 10% |
Supply power: Current |
<0.5 A |
<0.5 A |
Supply power: Frequency |
50/60 Hz |
50/60 Hz |
Dimensions (HxWxD) |
89 x 427 x 560 mm |
89 x 427 x 560 mm |
Weight |
5 kg |
5 kg |