|
Input
|
|
Maximum Power per phase
|
FCS18-1 (1 phase): 18 kVA; FCS18-3 (3 phase): 6 kVA
|
|
Power factor
|
0 to unity at full output VA
|
|
Voltage Ranges
|
|
Range
|
VLow
|
VHigh
|
|
AC
|
0 - 135 V
|
0 - 270 V
|
|
VA Programming Resolution
|
100 mV
|
|
Load Regulation
|
< 0.1 % FS
|
|
Line Regulation
|
< 0.02 % for 10 % line change
|
|
See -HV and EHV options for alternative voltage range pairs.
|
|
Programming Accuracy
(25°C ±5°C)
|
± (0.05% + 0.25 V) from 10V to FS. Specified at voltage sense point with ALC mode ON.
|
|
Frequency Range
|
45 Hz - 1200 Hz (see -HF option for higher output frequencies)
|
|
Frequency Resolution
|
0.01 Hz at < 81.9 Hz,
0.1 Hz at 82.0 to 819.1 Hz,
1 Hz at > 819 Hz
|
|
Max RMS Current
|
|
Range
|
FCS18-1
|
FCS18-3
|
|
0 - 135 V
|
133.2 Arms
|
44.4 Arms
|
|
0 - 270 V
|
66.6 Arms
|
22.2 Arms
|
|
Note: Constant power mode on the FCS Series II provides increased current at reduced voltage
|
|
Current Limit
|
Programmable from 0 Amps to maximum current for selected range
|
|
Peak Current
|
5.7 X (lrms @ full scale voltage)
|
|
Output Noise
|
100mV rms typ. (20 kHz to 1 MHz)
|
|
Isolation Voltage
|
300 V rms output to chassis
|
|
Harmonic Distortion
|
< 1% (at full scale voltage, full resistive load)
|
|
Output Relay
|
Push button controlled and bus controlled output relay
|
|
Input
|
|
Line Voltage/Current (rms per phase)
|
|
Models
|
Line Voltage
|
Line Current
|
|
208 VAC (STD)
|
± 10%
|
65 Arms
|
|
240 VAC (OPT)
|
± 10%
|
56 Arms
|
|
380 VAC (OPT)
|
± 10%
|
36 Arms
|
|
415 VAC (OPT)
|
± 10%
|
33 Arms
|
|
480 VAC (OPT)
|
± 10%
|
28 Arms
|
|
Line VA
|
24 KVA at nominal input voltage
|
|
Line Frequency
|
47-63 Hz
|
|
Efficiency
|
85% (Typical) depending on line and load
|
|
Power Factor
|
0.85 (Typical)
|
|
Inrush Current
|
250 Apk max. (Note: Each FCS chassis requires its own AC service)
|
|
Hold-up Time
|
> 10 ms
|
|
Isolation Voltage
|
400 VAC RMS input to output; 1350 VAC input to chassis
|
|
Measurement
|
|
Voltage
|
Resolution 0.1 Volt, Accuracy 0.05% + 0.25%, Range 0 - 400 V
|
|
Current
|
Resolution 0.01 Amp, Accuracy 0.1% + 0.15A, Range 0 - 20 Amps
|
|
Power
|
Resolution 0.01 kW, Accuracy 1.0 % FS, Range 0 - 54 KW
|
|
Phase Angle
|
Resolution 0.1°, Accuracy ± 2°, Range 0 - 360 °
|
|
Power Factor
|
Range 0.00 to 1.00
|
|
Frequency
|
Resolution four decades, Accuracy ± 0,02 Hz to 99.99 Hz, ± 0.2 Hz to 500.0 Hz, ± 0.5 Hz to 999.9 Hz,
± 10 Hz to 1200 Hz
|
|
Apparent Power
|
Resolution 0.01 kVA, Accuracy 1.0 % FS, Range 0 - 54 KVA
|
|
Protection
|
|
Overload / Temp / Voltage
|
Overload: Constant current or constant voltage mode; Over temperature: Automatic Shutdown; Over voltage: Surge protection to withstand EN50082-1 (IEC 801-4, 5) levels.
|
|
Regulatory / RFI Suppression
|
IEC1010, EN50081-2, EN50082-2, CE, EMC, and safety mark requirements / RIF Suppression: CISPR 11, Group1, Class A
|
|
System
|
|
Storage
|
Setup: 16 complete instrument setups / Transient List: 100 transient steps per list (SCPI mode) or 16 transient registers (APE mode)
|
|
Trigger Input / Output
|
Input: Triggers measurements or transient steps - SMA connector: 10K pull-up / Output: SMA Connector: HCTTL output
|
|
Remote Control
|
|
IEEE-488 Interface (option)
|
IEEE-488 (GPIB) talker listener. Subset: AH1, C0, DC1, DT1, L3, PP0, RL2, SH1, SR1, T6, IEEE-488.2 SCPI Syntax
|
|
USB Interface & Ethernet
|
Version: USB 1.1; Speed: 460 Kb/s maximum / Ethernet Interface (Optional): specify -LAN option. 10BaseT, 100BaseT, RJ45
|
|
RS232C Interface
|
Bi-directional serial interface; 9-pin D-shell connector. Handshake: CTS, RTS. Databits: 7 w/ parity, 8 w/o parity. Stopbits: 2. Baud rate: 9600 to 115200. Supplied with RS232C cable / Code and Format: SCPI; APE (option -GPIB)
|
|
Physical Dimensions
|
|
Dimensions (per chassis)
|
Height: 45” (114.3 cm), Width: 30” (76.2 cm), Depth: 36” (+ 4” for J-box) = 40” (101.6 cm) (For /2 or /3 models multiply height by 2/3)
|
|
Weight
|
Chassis: Net: 900 lbs / 87.7 Kg, Shipping: 1100 lbs / 127.3 Kg (for /2 or /3 model configurations multiply number of chassis).
|
|
Vibration and Shock
|
Designed to meet NSTA project 1A transportation leveI
|
|
Air Intake/Exhaust
|
Forced air cooling, front to rear air intake, rear exhaust, variable fan speed
|
|
Temperature
|
Operating: 0 to 35° C, full power / Storage: -40 to +85° C
|
|
Diagnostics
|
Built-in self test available over bus (*TST)
|
|
Rear Panel Connectors
|
* Three phase AC input and output terminal block with safety cover. * IEEE-488 (GPIB) connector, USB connector, RJ45 connector (with -LAN Option). * 9-pin D-Shell RS232C connector (RS232 DB9 to DB9 cable supplied). * Remote Inhibit (INH) and Discrete Fault Indicator (DFI). * Remote voltage sense terminal block. * Trigger In1 and Trigger Out1. * System interface connectors. * Auxilary Output
(Option -AX)
|
![](javascript:addcart({"pid":1017,"pname":"Rohde & Schwarz HM7042-5 Triple power supply 32V 5A 155.5W","image":"/uploads/2019/06/rs_hm7042-5.png"})){kind=link}
![](javascript:addcart({"pid":610,"pname":"EM TEST RDS 200N Auxiliary DC Voltage Source","image":"/uploads/2018/02/em_test_rds_200n.png"})){kind=link}
![](javascript:addcart({"pid":578,"pname":"EM TEST NetWave 108.3 (3-Phase) AC/DC Power Source","image":"/uploads/2018/02/emtest_netwave_108.3.png"})){kind=link}
![](javascript:addcart({"pid":576,"pname":"EM TEST NetWave 90.2 (3-Phase) AC/DC Power Source","image":"/uploads/2018/02/emtest_netwave_90.2.png"})){kind=link}
![](javascript:addcart({"pid":575,"pname":"EM TEST NetWave 67.3 (3-Phase) AC/DC Power Source","image":"/uploads/2018/02/emtest_netwave_67.3.png"})){kind=link}
![](javascript:addcart({"pid":574,"pname":"EM TEST NetWave 67.2 (3-Phase) AC/DC Power Source","image":"/uploads/2018/02/emtest_netwave_67.2.png"})){kind=link}
![](javascript:addcart({"pid":573,"pname":"EM TEST NetWave 67 (3-Phase) AC/DC Power Source","image":"/uploads/2018/02/emtest_netwave_67.png"})){kind=link}
![](javascript:addcart({"pid":572,"pname":"EM TEST NetWave 30.3 (3-Phase) AC/DC Power Source","image":"/uploads/2018/02/emtest_netwave_30.3.png"})){kind=link}