DetailsMaxim

sorensen DLM 150-4 Programmable DC Power Supply 150V 4A 600W

sorensen DLM 150-4 Programmable DC Power Supply 150V 4A 600W is designed to provide continuously variable output voltage and current for a broad range of applications in a compact 1U (1.75 inches) high, half-rack (8.5 inch) wide chassis.

With the use of Zero Voltage Switching (ZVS) technology, these supplies are able to achieve exceptionally low, near-linear ripple and noise rivaling larger and more expensive linear power supplies. In addition, the high efficiency and fast load transient response assure that the DLM is ideal for even the most demanding applications.

The Sorensen DLM 600W models are ideal for high density multiple output rackmount requirements or low profile benchtop applications. Output voltages from 0-5VDC to 0-300VDC and currents from 0-2A to 0- 75A are available.

The cooling air intake is at the front and sides with exhaust at the rear and sides. Variable speed fans are controlled as a function of ambient air temperature and load, thus reducing acoustic noise and increasing fan life. This allows supplies to be stacked one directly on top of another without space in between, yielding maximum rackmount packing density and a wide operating temperature of 0-50° C. An optional rackmount kit is available to easily mount one or two units side-by-side.

The front panel layout makes the Sorensen DLM 600W series easy to use. Voltage and current can be set from individual 10-turn potentiometer knobs. Control push buttons include power on, output on, local/remote, voltage/ current preview and overvoltage protection preview. Set-point or actual voltage/ current values can be viewed on two 3-½ digit LED displays. The DLM 600W can also be controlled through IEEE488.2 GPIB (option) or LXI-compliant Ethernet (option).

Supplies can be connected in series or parallel. All models automatically accept any standard single phase input without manual set up.

Quantity:

Feature Specification

High Power Density: 600 watts in 1U (1.75 inches) high, half rack (8.5 inches) wide; no top or bottom clearance spacing required.
Near Linear Ripple & Noise Ripple as low as 2.5mV rms, noise as low as 15mV p-p.
Remote Control
LXI Compliant Ethernet LAN / RS-232C (16 bit)
IEEE-488.2 / RS-232C (12 bit)

Common
Remote Sense	The maximum load line drop is up to the full voltage rating of the supply. The drop in the load leads subtracts from the maximum voltage available for the load except as follows: maximum rated voltage is available at the load and voltage regulation specifications apply for line drops of<1V on DLM5-75 and DLM8-75, <2V for all other DLM600 models and DLM3K/4K models rated 5V to 16V, and <5V for all other DLM3K/4K models.
Remote Programming	Voltage, current (0-100%) and OVP (5-110%) of full scale can be programmed by selectable 0-5VDC, 0-10VDC, or 0-5kÎ©
Remote Monitoring	Voltage or current can be monitored with userselectable ranges, scaled to 0-5 VDC or 0-10 VDC
Operational Features	Master/slave parallel operation, up to 4 units of the same model can be connected in parallel, with active current sharing control. Series operation, multiple units of the same model can be connected in series, limited by 300Vpk between both output terminal and chassis.
Software	IVI-COM, LabVIEW® or LabWindow®/CVI driver for ethernet and IEEE-488.2
Regulatory Compliance	CE Compliant: €¢ Low Voltage Directive (73/23/EEC) using EN 61010-1, and €¢ EMC Directive (89/336/EEC) using EN 61326 Certified to UL 61010-1, CSA C22.2 No. 61010.1 and IEC/EN 61010-1
Input
Voltage and Frequency	90-132 VAC or 180-264 VAC max, auto ranging, 47-63 Hz, single phase, 2-wire plus ground
Current	11A maximum at 115VAC, 6A maximum at 230 VAC
Connector	IEC 320 with detachable line cord
Power Factor	0.6, typical at full load; dependent on the impedance of the AC input.
Output
Line Regulation	Voltage: 0.005% of V max + 2 mV Current: 0.01% of I max + 2 mA See table for input voltage variation over the AC input voltage range, with constant rated load.
Load Regulation	Voltage: 0.005% of V max + 2 mV Current: 0.02% of I max + 5 mA See table For 0-100% load variation, with constant nominal line voltage
Transient Response	500 Î¼s to steady-state output voltage (within 0.1% of Vmax) for 50-100% or 100-50% load change
Stability	±0.05% of maximum voltage or current over 8 hours after 30 minute warm-up time at fixed line, load and temperature
Efficiency	84% typical at maximum output power; 82% typical for DLM 5-75 and DLM 8-75
Temperature Coefficient	0.02%/°C of maximum output voltage, 0.03%/°C of maximum output current. Change in output per °C change in ambient temperature, with constant line and load.
Physical
Dimensions	Width: 8.5“ (216 mm) Height: 1U or 1.75“ (44 mm) Depth: 17“ (432 mm) Option M6 depth 20“ (508 mm)
Weight & Shipping
Weight	9.7 lbs. (4.4 kg)
Shipping Weight	12.7 lbs. (5.8 kg)
Output Ratings
Model	Voltage	Current	Power
DLM 5-75	0-5 VDC	0-75 ADC	375 W
DLM 8-75	0-8 VDC	0-75 ADC	600 W
DLM 10-60	0-10 VDC	0-60 ADC	600 W
DLM 20-30	0-20 VDC	0-30 ADC	600 W
DLM 40-15	0-40 VDC	0-15 ADC	600 W
DLM 60-10	0-60 VDC	0-10 ADC	600 W
DLM 80-7.5	0-80 VDC	0-7.5 ADC	600 W
DLM 150-4	0-150 VDC	0-4 ADC	600 W
DLM 300-2	0-300 VDC	0-2 ADC	600 W
Model	Line Regulation	Load Regulation
Voltage (0.005% of Vmax + 2 mV)	Current (0.01% of Imax + 2 mA)	Voltage (0.005% of Vmax + 2 mV)	Current (0.02% of Imax + 5 mA)
DLM 5-75	2.4 mV	9.5 mA	2.4 mV	20 mA
DLM 8-75	2.4 mV	9.5 mA	2.4 mV	20 mA
DLM 10-60	2.5 mV	8 mA	2.5 mV	17 mA
DLM 20-30	3 mV	5 mA	3 mV	11 mA
DLM 40-15	4 mV	3.5 mA	4 mV	8 mA
DLM 60-10	5 mV	3 mA	5 mV	7 mA
DLM 80-7.5	6 mV	2.8 mA	6 mV	6.5 mA
DLM 150-4	9.5 mV	2.2 mA	9.5 mV	5.8 mA
DLM 300-2	17 mV	2.1 mA	17 mV	5.4 mA
Output Ratings
GPIB (M9G/M85)
Model	Voltage (0.2% of VMax)	Current (0.5% of IMax)	OVP (1% of 1.1 x VMax)
DLM 5-75	16 mV	375 mA	55 mV
DLM 8-75	16 mV	375 mA	88 mV
DLM 10-60	20 mV	300 mA	110 mV
DLM 20-30	40 mV	150 mA	220 mV
DLM 40-15	80 mV	75 mA	440 mV
DLM 60-10	120 mV	50 mA	660 mV
DLM 80-7.5	160 mV	38 mA	880 mV
DLM 150-4	300 mV	20 mA	1.65 mV
DLM 300-2	600 mV	10 mA	3.3 V
Programming Accuracy
Ethernet (M130/M131)
Model	Voltage (0.1% of VMax)	Current (0.25% of IMax)	OVP (0.5% of 1.1 x VMax)
DLM 5-75	8 mV	188 mA	44 mV
DLM 8-75	8 mV	188 mA	44 mV
DLM 10-60	10 mV	150 mA	55 mV
DLM 20-30	20 mV	75 mA	110 mV
DLM 40-15	40 mV	38 mA	220 mV
DLM 60-10	60 mV	25 mA	330 mV
DLM 80-7.5	80 mV	19 mA	440 mV
DLM 150-4	150 mV	10 mA	825 mV
DLM 300-2	300 mV	5 mA	1.65 V
Programming Accuracy
Ethernet (M130/M131)
Model	Voltage (0.1% of VMax)	Current (0.25% of IMax)	OVP (0.5% of 1.1 x VMax)
DLM 5-75	8 mV	188 mA	44 mV
DLM 8-75	8 mV	188 mA	44 mV
DLM 10-60	10 mV	150 mA	55 mV
DLM 20-30	20 mV	75 mA	110 mV
DLM 40-15	40 mV	38 mA	220 mV
DLM 60-10	60 mV	25 mA	330 mV
DLM 80-7.5	80 mV	19 mA	440 mV
DLM 150-4	150 mV	10 mA	825 mV
DLM 300-2	300 mV	5 mA	1.65 V
Programming Accuracy
GPIB
Model	Voltage (0.1% of VMax)	Current (0.25% of IMax)	OVP (0.5% of 1.1 x VMax)
DLM 5-75	16 mV	375 mA	55 mV
DLM 8-75	16 mV	375 mA	88 mV
DLM 10-60	20 mV	300 mA	110 mV
DLM 20-30	40 mV	150 mA	220 mV
DLM 40-15	80 mV	75 mA	440 mV
DLM 60-10	120 mV	50 mA	660 mV
DLM 80-7.5	160 mV	38 mA	880 mV
DLM 150-4	300 mV	20 mA	1.65 V
DLM 300-2	600 mV	10 mA	3.3 V
Display Accuracy
Model	Voltage	Current
DLM 5-75	35 mV	850 mA
DLM 8-75	50 mV	850 mA
DLM 10-60	60 mV	700 mA
DLM 20-30	200 mV	400 mA
DLM 40-15	300 mV	160 mA
DLM 60-10	400 mV	110 mA
DLM 80-7.5	500 mV	85 mA
DLM 150-4	850 mV	50 mA
DLM 300-2	2.5 V	30 mA
Ripple and Noise
Model	Ripple and Noise, Voltage Mode	OVP Adjustment Range (5% - 110% of Vmax)
Ripple (RMS)*	Noise (P-P)*
DLM 5-75	5 mV	30 mV	0.25 - 5.5 V
DLM 8-75	5 mV	30 mV	0.4 - 8.8 V
DLM 10-60	5 mV	30 mV	0.5 - 11 V
DLM 20-30	2.5 mV	15 mV	1 - 22 V
DLM 40-15	2.5 mV	15 mV	2 - 44 V
DLM 60-10	2.5 mV	20 mV	3 - 66 V
DLM 80-7.5	4 mV	20 mV	4 - 88 V
DLM 150-4	7 mV	40 mV	7.5 - 165 V
DLM 300-2	10 mV	60 mV	15 - 330 V
Ripple and Noise: Stability
Model	Voltage (0.05% of VMax)	Current (0.05% of IMax)
DLM 5-75	2.5 mV	37.5 mA
DLM 8-75	4 mV	37.5 mA
DLM 10-60	5 mV	30 mA
DLM 20-30	10 mV	15 mA
DLM 40-15	20 mV	7.5 mA
DLM 60-10	30 mV	5 mA
DLM 80-7.5	40 mV	3.75 mA
DLM 150-4	75 mV	2 mA
DLM 300-2	150 mV	1 mA
Ripple and Noise
Model	Traffic Coefficient	Maximum Total Remote Sense Drop
Voltage (0.02% /°C of Vmax)	Current (0.03% /°C of Imax)
DLM 5-75	1 mV / °C	22.5 mA / °C	1 V
DLM 8-75	1.6 mV / °C	22.5 mA / °C	1 V
DLM 10-60	2 mV / °C	18 mA / °C	2 V
DLM 20-30	4 mV / °C	Related Products Rohde & Schwarz HM7042-5 Triple power supply 32V 5A 155.5W EM TEST RDS 200N Auxiliary DC Voltage Source EM TEST NetWave 108.3 (3-Phase) AC/DC Power Source EM TEST NetWave 90.2 (3-Phase) AC/DC Power Source EM TEST NetWave 67.3 (3-Phase) AC/DC Power Source EM TEST NetWave 67.2 (3-Phase) AC/DC Power Source EM TEST NetWave 67 (3-Phase) AC/DC Power Source EM TEST NetWave 30.3 (3-Phase) AC/DC Power Source EM TEST NetWave 30.2 (3-Phase) AC/DC Power Source EM TEST NetWave 30 (3-Phase) AC/DC Power Source EM TEST NetWave 20.3 (3-Phase) AC/DC Power Source EM TEST NetWave 20.2 (3-Phase) AC/DC Power Source EM TEST NetWave 20 (3-Phase) AC/DC Power Source EM TEST NetWave Series (3-Phase) AC/DC Power Sources EM TEST AIF 503N-series 3-Phase Flicker Impedances 16A - 75A View all MAXIM INSTRUMENTS Providing solutions to complex engineering problems.™ Company About Us Blogs Careers Contact Product Pricing Features Customers Demos Categories Data Acquisition ESD Simulators Power Supplies Network Analyzers Social Network Facebook Twitter Linkedin Google + Maxim Instruments © 2019 Brands Categories Standards Applications Contact Us Shopping Cart View Cart Proceed to Quote Start typing and press Enter to search Add To Cart

sorensen DLM 150-4 Programmable DC Power Supply 150V 4A 600W

Related Products