DetailsMaxim

sorensen SGI Series Modular Programmable DC Power Supply 5kW - 30kW

sorensen SGI Series Modular Programmable DC Power Supply 5kW - 30kW represents the next generation of high power programmable DC power supplies. The SG Series is designed for exceptional load transient response, low noise and the highest power density in the industry. With a full 15 kW available down to 20Vdc output, and 12kW at 10Vdc and 1200ADC in a 3U package, the SG leads the industry in power density. The SG provides models up to 1000Vdc at 15amps. The power density is enhanced by a stylish front air intake allowing supplies to be stacked without any required clearance between units.

At the heart of the SG series is a 5 kW power module. Depending on the output voltage, one to six modules can be configured in a single chassis to deliver 5 kW to 30 kW of power. Combinations of these chassis can then be easily paralleled to achieve power levels up to 150 kW. Paralleled units operate like one single supply providing total system current. Available in two control versions, the SGA has basic analog controls, while the SGI provides intelligent control features.

(Sorensen General purpose Analog) The SGA, with its industry leading price performance, is available for customers requiring simple front panel analog controls or external control. With the same high performance power electronics as the SGI, the SGA provides essential features like 10- turn potentiometers for setting voltage and current, 3 ½ digits LED readout plus front panel over-voltage protection (OVP) preview/adjustment and reset.

Quantity:

Feature Specification

High Power Density: up to 15 kW in 3U, 30 kW in a 6U chassis
Wide Voltage Range: 0-10V up to 0-1000V, from 4 to 30 kW
Fast Load Transient Response: Protection from undesired voltage excursions
Low Ripple and Noise
Hardware Trigger (Ethernet Option)
Parallelable up to 150 kW
Sequencing: Free system controller & speed up test
Low audible noise: Temperature controlled variable speed fans

Sorensen SGI Applications

Burn-In
Materials Research
Product Validation
Rackmount ATE Systems
Compliance Testing
Process Control
Automotive Electronics
Battery Charging

SGI / SGA Comparison Chart
Feature	SGA	SGI
Modular Design	€¢	€¢
Fast Load Transient	€¢	€¢
Parallelable	€¢	€¢
Analog & Digital Summing	Optional	€¢
Direct Front Panel V/1 Control	€¢	€¢
3½ Digit LED Readout	€¢
Graphics Display		€¢
Sequencing		€¢
Save / Recall Setups		€¢
System Power Readouts		€¢
Constant Power Mode		€¢
IEEE-488.2/RS-232C	Optional	RS-232C Std IEEE-488.2 Optional
LXI Class C Ethernet/ RS-232	Optional	RS-232C Std, Ethernet Optional
Front Panel Dust Filter	Optional (3U unit only)	Optional (3U unit only)

Common
Remote Sense	Terminals are provided to sense output voltage at point of load. Maximum line drop 5% of rated voltage per line for 40-100V models, line drop 1V of rated voltage per line for 10-20V models, 1.5V for 30V models, 2% of rated voltage per line for models 160V and greater. (Greater line drop is allowed, but output regulation specifications no longer apply).
Parallel Operation	Up to 5 units may be paralleled for additional current within the power supply single-unit specifications, with exception of the DC output current set accuracy. Additional paralleled SG units will add 0.3% inaccuracy per unit. To parallel more than 5 units, contact factory.
Series Operation	Up to 2 units (see Output Float Voltage)
Input
Nominal Voltage 3 phase, 3 wire + ground	208/220 VAC (operating range 187 - 242 VAC) 380/400 VAC (operating range 342 - 440 VAC) 440/480 VAC (operating range 396 - 528 VAC)
Frequency	47 - 63Hz , 400Hz ( 400Hz @ 208VAC, for 6U units is optional modification and does not carry CE, UL or CSA markings )
Power Factor	>0.9 typical for 10V - 30V, 50V, 1000V and other models with optional “PF“ modification. >0.75 typical for 208/220 VAC input (40V, 60V - 800V models, 0.9 available with modification “PF“) >0.72 typical for 380/480 VAC input (40V, 60V - 800V models, 0.9 available with modification “PF“) >0.69 typical for 440/480 VAC input (40V, 60V - 800V models, 0.9 available with modification “PF“)
Protection	½ cycle ride-though , typical, on all three phases, 3 cycle ride through on single phase; missing phase shutdown ( 800V model 6.4 msec on all 3 phases )
SORENSEN SG Series
Power Unit Weight:	5kW 52 lbs.	10kW 66 lbs.	15kW 80 lbs.	20kW 132 lbs.	25kW 146 lbs.	30kW 160 lbs.
Shipping Weight	62 lbs	76 lbs.	115 lbs.	167 lbs.	181 lbs.	195 lbs.
Dimensions: L/W/H	26.4"" x 19"" x 5.25""	26.4"" x 19"" x 5.25""	26.4"" x 19 x 5.25""	25"" x 19"" x 10.5""	25"" x 19"" x 10.5""	25"" x 19"" x 10.5""
(40V and above)
Voltage-Current Combinations: (rounded to whole A)	40X125	40X250	40X375	**	**	**
50X100	50X200	50X300	**	**	**
60X83*	60X167*	60X250*	60-333*	60-417*	60-500*
80X63	80X125	80X188	80-250	80-313	80-375
100X50*	100X100*	100X150*	100-200*	100-250*	100-300*
160X31*	160X63*	160X94*	160-125*	160-156*	160-188*
200X25	200X50	200X75	200-100	200-125	200-150
250X20	250X40	250X60	250-80	250-100	250-120
330X15	330X30	330X45	330-61	330-76	330-91
400X12	400X25	400X38	400-50	400-63	400-75
600X8	600X17	600X25	600-33	600-42	600-50
800X6	800X13	800X19	**	**	**
SORENSEN SG Series
Power Unit Weight:	4kW 65 lbs.	5kW 65 lbs.	8kW 85 lbs.	10kW 85 lbs.	12kW 110 lbs.	15kW 110 lbs.
Shipping Weight	85 lbs	85 lbs	105 lbs.	105 lbs.	130 lbs.	130 lbs.
Dimensions: L/W/H	26.5"" x 19"" x 5.25""	26.5"" x 19"" x 5.25""	26.5"" x 19"" x 5.25""	26.5"" x 19"" x 5.25""	26.5"" x 19"" x 5.25""	26.5"" x 19"" x 5.25""
(30V and below)
Voltage-Current Combinations:	10X400		10X800		10X1k2 (1200)
15X267		15X534		15X801
	20X250		20X500		20X750
	30X167		30X334		30X501
Environmental
Operating Temperature	0 to 50º C
Storage Temperature	-25º C to 65º C
Humidity Range	Relative humidity up to 95% non-condensing, 0º C - 50º C
Altitude	Operating full power available up to 5,000 ft. (~1,500 m), derate 10% of full power for every 1,000 feet higher; non-operating to 40,000 ft. (~12,000 m)
Cooling	Front and side air inlet, rear exhaust. Temperature controlled, variable speed fans. Units may be stacked without spacing.
Regulatory	Certified to UL/CSA 61010 and IEC/EN 61010-1 by a NRTL, CE Compliant, Semi-F47 Compliant. LVD Categories: Installation Category II: Pollution Degree 2; Class II Equipment: for Indoor Use Only, back panel not user accessible (see user manual for installation instructions) EMC Directive, EN 61326:1998
Front Panel Dust Filter	30 PPI (Pores Per Inch) - must ensure adequate airflow and / or derate max. temperature. 3U unit only.
Output
Ripple & Noise (Voltage Mode, Typical)	See Output: Voltage & Current Ranges Chart above. Ripple and noise specified at full load, nominal AC input. Noise measured with 6ft. cable, 1Î¼f at load
Ripple (Current Mode)	<+/- 0.04% of full scale rms current
DC Voltage Slew Rate (40-800V)	‰ˆ< 100 ms 5-95% of full scale typical - resistive load (Contact factory for model specific slew rates)
Output Voltage Rise Time (10-30V)	Rise Time, ms, MAX	Condition
10	Measured from 10% to 90% of the output voltage change - resistive load, typical
Output Voltage Fall Time (10-30V)	Fall Time, MS MAX	Condition
No Load 1 50	100% CC Load 10	100% CR Load 10	Measured from 90% to 10% of the output voltage change. - resistive load, typical
Output Current Rise Time (10-30V)	Rise Time, ms, MAX	Condition
20	Measured from 10% to 90% of the output current change - resistive load, typical
Output Current Fall Time (10-30V)	Rise Time, ms, MAX	Condition
10	Measured from 90% to 10% of the output current change - resistive load, typical
DC Current Slew Rate	45A / ms typical - resistive load
Line Regulation (with sense wires used)	(±10% of nominal AC input, constant load) Voltage Mode: +/- 0.01% of full scale (40-800V) Current Mode: +/- 0.05% of full scale (40-800V) Voltage Mode and Current Mode: +/- 0.05% of full scale (10-30V)
Load Regulation (with sense wires used)	(no load to full load, nominal AC input) Voltage Mode: +/- 0.02% of full scale (40-800V) Current Mode: +/- 0.1% of full scale Voltage Mode: +/- 0.05% of full scale (10-30V)
Load Transient Response	Recovers within 1ms to +/-0.75% of full-scale of steadystate output for a 50% to 100% or 100% to 50% load change
Efficiency	87% typical at nominal line and max load
Stability	±0.05% of set point after 30 minute warm-up and over 8 hours at fixed line, load and temperature, typical
Temperature Coefficient	0.02%/ C of maximum output voltage rating for voltage set point, typical 0.03%/ C of maximum output current rating for current set point, typical
Output Float Voltage	Negative terminal within +/- 300 V of chassis potential. (We recommend the use of optional isolated analog Interface (IAI).) Supplies in ""series"" should be the same output voltage/current, in not system current is limited to lower of the two supplies.

sorensen SGI Series Modular Programmable DC Power Supply 5kW - 30kW

Related Products

Rohde & Schwarz HM7042-5 Triple power supply 32V 5A 155.5W

EM TEST RDS 200N Auxiliary DC Voltage Source

EM TEST NetWave 108.3 (3-Phase) AC/DC Power Source

EM TEST NetWave 90.2 (3-Phase) AC/DC Power Source

EM TEST NetWave 67.3 (3-Phase) AC/DC Power Source

EM TEST NetWave 67.2 (3-Phase) AC/DC Power Source

EM TEST NetWave 67 (3-Phase) AC/DC Power Source

EM TEST NetWave 30.3 (3-Phase) AC/DC Power Source

EM TEST NetWave 30.2 (3-Phase) AC/DC Power Source

EM TEST NetWave 30 (3-Phase) AC/DC Power Source

EM TEST NetWave 20.3 (3-Phase) AC/DC Power Source

EM TEST NetWave 20.2 (3-Phase) AC/DC Power Source

EM TEST NetWave 20 (3-Phase) AC/DC Power Source

EM TEST NetWave Series (3-Phase) AC/DC Power Sources

View all

MAXIM INSTRUMENTS