DetailsMaxim

Amplifier Research 80/10S1G11 Dual Band Amplifier 0.7 GHz - 10.6 GHz

Amplifier Research 80/10S1G11 Dual Band Solid State Amplifier 0.7 GHz - 10.6 GHz is designed for applications where instantaneous bandwidth, high gain and linearity are required.

The Model 80/10S1G11 is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. The digital display on the front panel indicates control status and reports of internal amplifier status. All amplifier control functions and status indications are available remotely in GPIB/IEEE-488 format, RS-232 hardwire and fiber optic, USB, and Ethernet.

This Model is designed to have low spurious signals, linearity and is extremely load tolerant which enables it to be used in many RF applications such as: RF susceptibility testing, antenna/component testing, and communication technology testing. It can be used as test instruments covering multiple frequency bands and are suitable for a variety of communication technologies such as CDMA, W-CDMA, TDMA, GSM, UWB, WiMAX etc.

Quantity:

Feature Specification

Digital display
Linear and load tolerant
Combines two amplifiers into one unit
Mismatch Tolerant providing 100% of rated power without foldback
Flexibility to be upgraded to higher power levels for each specific frequency range
Will operate without damage or oscillation with any magnitude and phase of source and load impedance
Capability to reproduce AM, FM or Pulse Modulation appearing on the input signal

Rated Power Output	80 watts min (0.7 - 4.2 GHz), 10 watts min (4 - 10.6 GHz)
Input For Rated Output	1.0 milliwatt max., 0dBm
Power Output @ 3dB compression
Nominal	95 watts (0.7 - 4.2 GHz), 13 watts (4 -10.6 GHz)
Minimum	80 watts (0.7 - 4.2 GHz), 10 watts (4 -10.6 GHz)
Power Output @ 1dB compression
Nominal	80 watts (0.7 - 4.2 GHz), 11 watts (4 - 10.6 GHz)
Minimum	70 watts (0.7 - 4.2 GHz), 9 watts (4 - 10.6 GHz)
Flatness	±1.5 dB typ., ±2.0 dB max. (0.7 - 4.2 GHz) ±2.0 db typ., ±3.0 dB max. (4 - 10.6 GHz)
Frequency Response	0.7 - 10.6 GHz instantaneously
Gain (at max. setting)	49 dB min (0.7 - 4.2 GHz) 40 dB min (4 - 10.6 GHz)
Gain Adjustment (continuous range)	10 dB minimum (4096 steps remote)
Input Impedance	50 ohms, VSWR 2.5:1 max.
Output Impedance	50 ohms, nominal
Spurious	Minus 73 dBc typ.
Harmonic Distortion	Minus 20 dBc max. at 80 watts (0.7 - 4.2 GHz) Minus 20 dBc max. at 10 watts (4 - 10.6 GHz)
Third Order Intercept Point	58 dBm typ. (0.7 - 4.2 GHz), 50 dBm typ. (4 - 10.6 GHz)
Noise Figure	10 dB typ.
Primary Power	90-132, 180-264 VAC 50/60 Hz, single phase 448 watts max. (0.7 - 4.2 GHz) <300 watts max. (4 - 10.6 GHz)
Connectors
RF input	Type N female front panel
RF output	Type N female front panel
Standard Remote Interfaces
IEEE-488	24 pin female
RS-232	9 pin Subminiature D Female
RS-232 (fiber optic)	Type ST
USB 2.0	Type B
Ethernet	RJ-45
Safety Interlock	15 Pin Subminiature D
Cooling	Forced air (self contained fans)
Size (W x H x D)	50.3 x 34.3 x 61 cm (19.8 x 13.5 x 24 in)

SPECIFICATIONS COMMON TO ALL MODELS IN THE SERIES

INPUT FOR RATED OUTPUT	1.0 milliwatt maximum, 0 dBm
INPUT IMPEDANCE	50 ohms, VSWR 2.5:1 maximum
OUTPUT IMPEDANCE	50 ohms, nominal
MISMATCH TOLERANCE	100% of rated power without foldback. Will operate without damage or oscillation with any magnitude and phase of source and load impedance
MODULATION CAPABILITY	Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
SPURIOUS	Minus 73 dBc typical
CONNECTORS
RF INPUT	TYPE N (front panel)
RF OUTPUT	TYPE N (front panel)
M1 version (2) RF OUTPUT (1 for each band)	TYPE N (front panel)
REMOTE INTERFACES
IEEE-488	24 pin female
RS-232	9 pin subminiature D (female)
RS-232 (Fiber-optic)	Type ST
USB 2.0	Type B
Ethernet	RJ-45
SAFETY INTERLOCK	15 pin subminiature D
COOLING	Forced air (self-contained fans)
SIZE (W x H x D) (Cabinet)	50.3 x 34.3 x 61 cm (19.8 x 13.5 x 24 in) 48.3 x 31.1 x 61 cm (19.0 x 12.25 x 24 in)

Amplifier Research 80/10S1G11 Dual Band Amplifier 0.7 GHz - 10.6 GHz

Related Products

Rohde & Schwarz BBL200-series Broadband Amplifier 9 kHz - 225 MHz up to 10kW

Rohde & Schwarz BBA150-series Broadband Amplifiers 4 kHz - 6 GHz up to 3000W

Rohde & Schwarz BBA130-series Broadband Amplifiers 80 MHz - 6 GHz up to 4200W

AE Techron 7700-series EMC Amplifiers DC - 30 kHz, 5 - 20kW

AE Techron 7220-series EMC Amplifiers DC - 1 MHz 1000W

Teseq CBA 6G-120B Broadband Amplifier 1.8 GHz - 6 GHz 120W

Teseq CBA 6G-080B Broadband Amplifier 1.8 GHz - 6 GHz 80W

Teseq CBA 6G-040B Broadband Amplifier 1.8 GHz - 6 GHz 40W

View all

MAXIM INSTRUMENTS