POWER (Fundamental), Peak Pulse, @ Output

Nominal

2,400 watts

Minimum

1,900 watts

FLATNESS

±6 dB maximum

FREQUENCY RESPONSE

1 - 2.5 GHz

INPUT FOR RATED OUTPUT

1.0 milliwatt maximum

GAIN (at maximum setting)

63 dB minimum

GAIN ADJUSTMENT (continuous range)

35 dB minimum

INPUT IMPEDANCE

50 ohms, VSWR 2.5:1 maximum

OUTPUT IMPEDANCE

50 ohms, VSWR 2.5:1 typical

MISMATCH TOLERANCE

Output pulse width foldback protection at peak reflected power exceeding 1,000 watts. Will operate without damage or oscillation with any magnitude and phase of source and load impedance. May oscillate with unshielded open due to coupling to input. Should not be tested with connector off.

PULSE CAPABILITY

Pulse Width

0.07 - 100 microseconds.

Pulse Rate (PRF)

100 kHz maximum

Duty Cycle

4% maximum.

RF Rise and Fall

30 ns max (10% to 90%).

Delay

300 ns maximum from pulse input to RF 90%

Pulse Width Distortion

±30 ns maximum (50% points of output pulse width compared to 50% points of input pulse width)

Pulse Off Isolation

80 dB minimum, 90 dB typical

Pulse Input

TTL level, 50 ohm nominal termination

NOISE POWER DENSITY

(pulse on)

Minus 70 dBm/Hz maximum; Minus 80 dBm/Hz typical

(pulse off)

Minus 140 dBm/Hz (typical)

HARMONIC DISTORTION

Minus 3 dBc maximum, minus 6 dBc typical

PRIMARY POWER

190-260 VAC, 50/60 Hz single phase, 1.2 KVA maximum

CONNECTORS

RF input

Type N female on rear panel

RF output

Type DIN 7-16 female on rear panel

RF output forward and reflected sample ports

Type N female on rear panel

Pulse input

Type BNC female on rear panel

GPIB

IEEE-488 female on rear panel

Interlock

DB-15 female on rear panel

COOLING

Forced air (self contained fans), air entry and exit in rear.

SIZE (W x H x D)

50.3 x 26 x 94 cm, 19.8 x 10.3 x 37 in

WEIGHT (approximate)

57 kg, 125 lbs