|
POWER (Fundamental), Peak Pulse, @ Output
|
|
Nominal
|
7,000 watts
|
|
Minimum
|
5,700 watts
|
|
FLATNESS
|
±10 dB maximum, ±5 dB at rated power
|
|
FREQUENCY RESPONSE
|
12 - 18 GHz
|
|
INPUT FOR RATED OUTPUT
|
1.0 milliwatt maximum
|
|
GAIN (at maximum setting)
|
67 dB minimum
|
|
GAIN ADJUSTMENT (continuous range)
|
35 dB minimum
|
|
INPUT IMPEDANCE
|
50 ohms, VSWR 2.5:1 maximum
|
|
OUTPUT IMPEDANCE
|
50 ohms, VSWR 2.5:1 typical
|
|
MISMATCH TOLERANCE
|
Output pulse width foldback protection at peak reflected power exceeding 3,000 watts. Will operate without damage or oscillation with any magnitude and phase of source and load impedance. May oscillate with unshielded open due to coupling to input. Should not be tested with connector off.
|
|
PULSE CAPABILITY
|
|
Pulse Width
|
0.2 - 50 microseconds.
|
|
Pulse Rate (PRF)
|
100 kHz maximum
|
|
Duty Cycle
|
4% maximum.
|
|
RF Rise and Fall
|
35 ns max (10% to 90%).
|
|
Delay
|
300 ns maximum from pulse input to RF 90%
|
|
Pulse Width Distortion
|
±30 ns maximum (50% points of output pulse width compared to 50% points of input pulse width)
|
|
Pulse Off Isolation
|
80 dB minimum, 90 dB typical
|
|
Pulse Input
|
TTL level, 50 ohm nominal termination
|
|
NOISE POWER DENSITY
|
|
(pulse on)
|
Minus 55 dBm/Hz maximum; Minus 80 dBm/Hz (typical)
|
|
(pulse off)
|
Minus 140 dBm/Hz (typical)
|
|
HARMONIC DISTORTION
|
Minus 15 dBc maximum
|
|
PRIMARY POWER
|
208V, US: 208 VAC  10%, 3 phase, delta (4 wire) 50/60 Hz, 5 KVA maximum
|
|
CONNECTORS
|
|
RF input
|
Type N precision female on rear panel. See S1C option, if applicable.
|
|
RF output
|
Type WR-62 waveguide flange / coax on rear panel
|
|
RF output forward and reflected sample ports
|
Type N precision female on rear panel. See S1C option, if applicable.
|
|
Pulse input
|
Type BNC female on rear panel. See S1C option, if applicable.
|
|
GPIB
|
IEEE-488 female on rear panel. See S1C option, if applicable.
|
|
Interlock
|
DB-15 female on rear panel. See S1C option, if applicable.
|
|
COOLING
|
Forced air (self contained fans), air entry and exit in rear.
|
|
SIZE (W x H x D)
|
50.3 x 43 x 84 cm, 19.8 x 17 x 33 in
|
|
WEIGHT (approximate)
|
121 kg, 265 lbs
|
![](javascript:addcart({"pid":915,"pname":"Rohde & Schwarz BBL200-series Broadband Amplifier 9 kHz - 225 MHz up to 10kW","image":"/uploads/2019/04/rs_bba200.png"})){kind=link}
![](javascript:addcart({"pid":914,"pname":"Rohde & Schwarz BBA150-series Broadband Amplifiers 4 kHz - 6 GHz up to 3000W","image":"/uploads/2019/04/rs_bba150.png"})){kind=link}
![](javascript:addcart({"pid":913,"pname":"Rohde & Schwarz BBA130-series Broadband Amplifiers 80 MHz - 6 GHz up to 4200W","image":"/uploads/2019/04/rs_bba130.png"})){kind=link}
![](javascript:addcart({"pid":41,"pname":"AE Techron 7700-series EMC Amplifiers DC - 30 kHz, 5 - 20kW","image":"/uploads/2019/02/ae_techron_7700-series.png"})){kind=link}
![](javascript:addcart({"pid":1416,"pname":"Teseq CBA 6G-120B Broadband Amplifier 1.8 GHz - 6 GHz 120W","image":"/uploads/2018/01/teseq_cba_6g-120b.png"})){kind=link}
![](javascript:addcart({"pid":1415,"pname":"Teseq CBA 6G-080B Broadband Amplifier 1.8 GHz - 6 GHz 80W","image":"/uploads/2018/01/teseq_cba_6g-080b.png"})){kind=link}
![](javascript:addcart({"pid":1414,"pname":"Teseq CBA 6G-040B Broadband Amplifier 1.8 GHz - 6 GHz 40W","image":"/uploads/2018/01/teseq_cba_6g-040b.png"})){kind=link}
![](javascript:addcart({"pid":1413,"pname":"Teseq CBA 3G-500B Broadband Amplifier 800 MHz - 3.1 GHz 500W","image":"/uploads/2018/01/Image_Placeholder.png"})){kind=link}
![](javascript:addcart({"pid":1412,"pname":"Teseq CBA 3G-300B Broadband Amplifier 800 MHz - 3.1 GHz 300W","image":"/uploads/2018/01/teseq_cba_3g-300b.png"})){kind=link}
![](javascript:addcart({"pid":1411,"pname":"Teseq CBA 3G-100B Broadband Amplifier 800 MHz - 3.1 GHz 100W","image":"/uploads/2018/01/teseq_cba_3g-100b.png"})){kind=link}
![](javascript:addcart({"pid":1410,"pname":"Teseq CBA 3G-050B Broadband Amplifier 800 MHz - 3.1 GHz 50W","image":"/uploads/2018/01/Teseq_cba_3g-050b.png"})){kind=link}