DetailsMaxim

Anritsu MT8801C Radio Communication Analyzer 300 kHz - 3 GHz

Every major radio communication system in the world, including GSM/DCS1800/PCS1900, CDMA, IS-136A, PDC, PHS and DECT, can be evaluated using just one MT8801CRadio Communication Analyzer, covering the 300 kHz to3 GHz frequency band in one hardware platform, and the dedicated measurement software options. The call processing test and sensitivity test using loopback method are possible for GSM/DCS1800/PCS1900, CDMA, IS-136A and DECT. In addition, connection testing, as well as send testing while communicating, are also possible for PDC and PHS measurement by using the call processing function, and the PDC uplink RCH can be monitored (RSSI, estimated error rate) too.FM radio transmission/reception tests are simplified by using the optional analog measurement function, and the optional spectrum analyzer function covering 10 MHz to 3 GHz is very useful for maintaining as well as measuring spurious near carrier on production lines. GPIB and RS-232C interfaces are standard, so MT8801C can be incorporated easily into automated production lines or on-site automated testing systems.

Quantity:

Feature Specification

Batch Measurements of Transmission Test Items
Constellation Display Functions
Modulation Analysis
Measurement of Antenna Power Rise/Fall Edge Characteristics
Calibration Functions
Wide-Band Power Meter
Adaptive BER Receiver Testing
Adjacent Channel Power Measurement
Call Processing Function
Receiver Sensitivity Measurement
Call Processing Function

Frequency range	300 kHz to 3 GHz
Maximum input level	+40 dBm (10 W, MAIN connector), +20 dBm (100 mW, AUX connector)
Input/output connector	MAIN I/O connector Impedance: 50 Ω, N-type VSWR: :s1.2 (:s2.2 GHz), :s1.3 (>2.2 GHz) AUX input/output connector: TNC-type
Reference oscillator	Frequency: 10 MHz Starting characteristics: :s5 ✕ 10-8/day (after 10 minutes of warm-up, referred to frequency after 24 hours warm-up) Aging rate: :s2 ✕ 10-8/day, :s1 ✕ 10 –7/year (referred to frequency after 24 hours warm-up) Temperature characteristics: :s5 ✕ 10 –8 (0° to 50°C, referred to frequency at 25°C) External standard input: 10 MHz or 13 MHz (±1 ppm), input level: 2 to 5 Vp-p
Power meter	Frequency range: 300 kHz to 3 GHz Level range: 0 to +40 dBm, –10 to +40 dBm (CDMA measurement) Level accuracy: ±10% (0 to +40 dBm, after zero-point calibration), ±10% (–10 to +40 dBm, 18° to 28°C, at average value, after zero-point calibration)
Signal generator	Frequency Range: 300 kHz to 3 GHz Resolution: 1 Hz Accuracy: Reference frequency accuracy ±100 mHz Output level Level range (no modulation or analog modulation): –13 to –133 dBm (Main), +7 to –133 dBm (AUX) Level accuracy: ±1 dB (10 MHz to 2.2 GHz, >–123 dBm, 18° to 28°C), ±3 dB (10 MHz to 2.2 GHz, >–133 dBm), ±2 dB (>2.2 GHz, >–123 dBm, 18° to 28°C), ±4 dB (>2.2 GHz, level: >–133 dBm) Radiated interference: 1 µV/50 Ω(carrier frequency measured, 25 mm from front panel with two-turn 25 mm diameter loop antenna) Signal purity Spurious: :s–50 dBc (at CW, offset frequency 100 kHz to :s50 MHz; where carrier frequency: other than 1300 to 1400 MHz and 2000 to 2100 MHz), :s–40 dBc (for all band) Harmonics: :s–25 dBc (at CW)
Others	Display: Color TFT-LCD, 7.8 size , 640 ✕ 480 dots Hard copy: Enables data hard copy of the display through a parallel interface (applicable only for EPSON VP series or equivalent) GPIB: This equipment is specified as a device, can be controlled from external controller (excluding power switch and FD ejection key). No controller function Interface: SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, DT1, C0, E2) Parallel Conform to the Centronics. Outputs printing data to printer. Data line exclusive for output: 8 Control line: 4 (BUSY, DTSB, ERROR, PE) Connectors: D-sub 25 pins, female (equivalent to the connector of IBM-PC/AT built-in printer) RS-232C: All functions except power switch controlled by external controller (baud rate: 1200, 2400, 4800, 9600 bps)
Dimensions and mass	426(W) ✕ 221.5(H) ✕ 451(D) mm, :s22 kg
Power	100 to 120/200 to 240 Vac (automatic voltage switch system), 47.5 to 63 Hz, :s300 VA
Operating temperature	0° to 50°C
EMC	EN61326: 1997/A1: 1998 (Class A), EN61000-3-2: 1995/A2: 1998 (Class A) EN61326: 1997/A1: 1998 (Annex A)
LVD	EN61010-1: 1993/A2: 1995 (Installation Category II, Pollution degree2)