DetailsMaxim

AWT Global PIM Analyzers - Single Band

AWT€™s PIM Analyzers are ideal for production and laboratory. These instruments are very accurate, yet highly reliable and built for true continuous 24/7 operation. The complete system consists only of one unit, making set-up easy and operation convenient. 

With the introduction of new wireless technologies like LTE, and LTE-A, network operators demand RF components that offer excellent PIM characteristics. AWT€™s PIM Analyzers are well suited for this task. With -172dBc sensitivity, our analyzers detect all PIM issues of tested RF components. Engineers appreciate the high accuracy over 100% of the IM measurements.

Quantity:

Feature Specification

Precision PIM Analyzer for production and laboratory
True 24/7 operation
3 Measurement modes: PIM Analyzer, PIM over Time, PIM over Frequency (Frequency Sweep)
Forward and reverse PIM measurements ( 2-port)
One unit of equipment holds the complete PIM Analyzer system

Model Number / Type	Tx Frequency (MHz)	Rx Frequency (MHz)
TETRA 400	390 ~ 400	380 ~ 384
E-TETRA400	420 ~ 430	410 ~ 412
AMPS/CDMA	869 ~ 896	824 ~ 851
GSM900	935 ~ 960	890 ~ 915
EGSM900	925 ~ 960	880 ~ 915
LTE-JP1500	1488 ~ 1520	1456 ~ 1480
DCS/GSM1800	1805 ~ 1880	1710 ~ 1785
PCS1900	1930 ~ 1990	1850 ~ 1910
AWS	2010 ~ 2155	1710 ~ 1755
TD-SCDMA(2000)	2010 ~ 2025	1900 ~ 1920
UMTS/W-CDMA	2110 ~ 2170	1920 ~ 1980
W-CDMA-JP	2150 ~ 2170	2110 ~ 2140
IMT-E(2600)	2620 ~ 2690	2500 ~ 2570
WiBro-KR	2110 ~ 2170 2300 ~ 2390	1910 ~ 1990
Accessories
Opt. 2	Accessory Kit: (2) low PIM cables 3m / 10ft, (1) low PIM cable 1m / 3ft, low PIM load 100W, adapters, torque wrench with hard carry case
Opt. 3	Low PIM Load 100W, < 165 dBc @ 2* 43W, DIN 7/16 (f)
Opt. 4	PIM Source: Generator with preset PIM value. Quick indication of system functionality. Ideal for test and training.
Transmitter
Carrier Power	+20 to +44 dBm (46 dBm optional)
Power Accuracy	+/- 0.35 dB
Frequency Accuracy	200 ppm
Reverse Pwr. Protection	+43 dBm for 5 sec
Receiver
Reverse IM @ 2x43dBm Forward IM @ 2x43dBm	-129 dBm / -172 dBc typ. -125 dBm / -168 dBc typ.
Noise Floor	-140 dBm (300 Hz BW)
Dynamic Range(typical)	> 96 dB (ref: -70 dBm)
Reverse Power Protection	+43 dBm for 5 sec
Operational Input Power	-40 dBm RMS
Max Input Power	-10 dBm
Measurement Accuracy	+/- 0.2 dB @ 2 x 43 dBm
Warm-up time (for full measurement accuracy)	10 mins
Dimensions / Weight / Environment / Electrical
Dimensions All units (except E-GSM) E-GSM units	488 x 653 x 278 (mm) 488 x 719 x 278 (mm)
Weight All units (except E-GSM) E-GSM units	35 kg 36 kg
Temperature	-10 °C to +40 °C
Humidity	80%, RH (non condensing)
Protection	IP20 (indoor use)
AC Power	100 to 240V 50/60 Hz
Power Consumption	750 Watts (VA)