DetailsMaxim

EM TEST NetWave 3.1 Single Phase AC/DC Power Source

EM TEST NetWave 3.1 Single Phase AC/DC Power Source is designed to meet the requirements as per the standards IEC/EN 61000-4-13, IEC/EN 61000-4-14 and IEC/EN 61000-4-28. Used as a DC power source it covers the requirements as per the standards IEC/EN 61000-4-17 (Ripple on DC) and IEC/EN 61000-4-29 for voltage dips and interruptions on DC supplies.

With its low distortion and high stability, even if supplying dynamic loads, the NetWave 3.1 guarantees full compliant measurements for harmonics and flicker testing as per IEC/EN 61000-3-2, -3-3, -3-11 and -3-12 as well as JIS C 61000-3-2.

The NetWave 3.1 is well suited for testing inverters (e.g. solar power, wind power) and e-vehicles. Additionally, it offers the necessary capabilities for avionics testing as per RTCA/DO-160, AIRBUS ABD0100 and BOEING as well as per MIL-STD-704.

MODEL SERIES OVERVIEW

NetWave Series (1-Phase) Programmable Multifunctional AC/DC Power Sources

Quantity:

Feature Specification Standards

Wide Power Bandwidth; DC - 5kHz
Output Power up to 3,500 VA AC and 4,250 W DC
Output Voltage max. 360V AC and +/- 500V DC
High Inrush Current Capability up to 200A
Extended trigger and control capabilities (NetWave 7.3)
Built-in Arbitrary Waveform Generator for easy generation of complex waveforms
Standard Test Routines for IEC/EN requirements as well as for Aircraft and MIL-STD testing
Built-in voltage and current measurement (option)
Multiple Interfaces

TECHNICAL DETAILS
Output Voltage	0 V - 310 VAC (RMS) 0V - +/-440 VDC
Output Current	10 A (RMS) continuous 20 A (RMS) short-term (max. 3 s) 70 A repetitive peak
SPECIFICATIONS
Output frequency	Output frequency DC - 5,000Hz
Frequency accuracy, stability	100ppm
DC offset with AC signal	<20mV with linear load
Slew rate	8V/us
REGULATION
Voltage sense	Internal or external, 4 wires
Distortion (THD)	Less than 0.5%, @50/60Hz
Output voltage stability	Better than 0.1%
Output voltage accuracy	Better than 0.5%
Max. compensable drop on wire	5% f.s.
Current limiter	2A to Imax for f < 75Hz (NetWave 3) 5A to Imax for f < 75Hz (NetWave 7.x)
Protection	Over current, over voltage, over temperature, low voltage
OUTPUTS
DUT connection	4mm safety lab connectors DUT adapter with connector (depends on country of use)
DISPLAY AND CONTROLS
Display	2-Line LCD, 40 characters
LED indicators	Power On Active output channel Trigger Functional status hard disk
Operation	6 function keys, Test On key: ON/OFF key for the power source
INTERFACES	GPIB, Ethernet USB (for memory stick) RS 232 (input from DPA analyzer) Frame bus (internal system bus)

Basic Standards

IEC 61000-3-11

IEC 61000-3-12

IEC 61000-3-2

IEC 61000-3-3

IEC 61000-4-11

IEC 61000-4-13

IEC 61000-4-14

IEC 61000-4-17

IEC 61000-4-28

IEC 61000-4-29

MIL-STD

AIRBUS

BOEING

MIL-STD-704

RTCA DO-160

RTCA DO-160 Section 16

International Standards

JIS C 61000-3-2

EM TEST NetWave 3.1 Single Phase AC/DC Power Source

Related Products

Rohde & Schwarz HM7042-5 Triple power supply 32V 5A 155.5W

EM TEST RDS 200N Auxiliary DC Voltage Source

EM TEST NetWave 108.3 (3-Phase) AC/DC Power Source

EM TEST NetWave 90.2 (3-Phase) AC/DC Power Source

EM TEST NetWave 67.3 (3-Phase) AC/DC Power Source

EM TEST NetWave 67.2 (3-Phase) AC/DC Power Source

EM TEST NetWave 67 (3-Phase) AC/DC Power Source

EM TEST NetWave 30.3 (3-Phase) AC/DC Power Source

EM TEST NetWave 30.2 (3-Phase) AC/DC Power Source

EM TEST NetWave 30 (3-Phase) AC/DC Power Source

EM TEST NetWave 20.3 (3-Phase) AC/DC Power Source

View all

MAXIM INSTRUMENTS