DetailsMaxim

Temptronic ATS-605 Thermostream -20° to +225°C

Designed for 60Hz operation only, this Advanced Temperature Source for fast and precise thermal conditioning of components, parts, hybrids, modules, sub-assemblies, and printed circuit boards. Capable of ultra-low temperatures without the use of Liquid Nitrogen (LN2) or Liquid Carbon Dioxide (LCO2).

Quantity:

Feature Specification

System Airflow Output: 4 to 10 scfm ( 1.9 to 4.7 l/s)
Temperature Display & Resolution: ±1°C
Temperature Accuracy: ±1°C
Directly Control the device under test (DUT
DUT Control Sensors: Type T or Type K Thermocouples
Remote interfaces: IEEE.488, RS232
Thermal Cap provides a localized thermal test environment, protecting from moisture condensation at the DUT site.
Handheld thermal wand for flexibility in bringing temperature to device; optional bench stand for hands-free operation
Compact, portable system fits benchtop
CE Compliant and CFC-free

Facility Requirements
Power	60Hz only, system does not operate at 50Hz 115 ±10% VAC, 60 Hz 15 amp, 1phase 230 ±10% VAC, 60 Hz 10 amp, 1phase
Compressed Air
Clean, Dry Air (CDA)	Filtered to 5 micron particulate contamination. Oil Content: <0.1 ppm, by weight, filtered to 0.01 micron oil contaminant. Dew point: ambient to -40°C
Air Supply Pressure	5.6 to 7kg /cm2 (80 to 90 PSIG) 5.6 kg/cm (90 PSIG) nominal
Total Air Flow Rate Required	4 to 5 l/s (8-10 scfm) 4.5 l/s (9 scfm) nominal
Air Supply Temperature	+20° to +28°C; +23°C nominal
Operating Environment
Operating Temperature	+20° to +28°C; +23°C nominal
Humidity	0 to 60%; 45% nominal
Service and Safety
Refrigerants	HCFC and CFC-free, non-toxic, non-flammable
Serviceability	Auto-diagnostics and field replaceable modules
Over Temperature Protection	+230°C (factory set): Operator can set high and low air temperature limits
Weight and Dimensions
Dimensions	Controller	40.1cm (15.8 inches) WIDE x 14.8cm (5.8 inches) HIGH x 48.9cm (19.2 inches) DEEP
Thermal Wand	8cm (3 inches) DIAMETER, 36cm (14 inches) LONG
Stand	48.25cm (19 inches) approximately above benchtop to top of post
Reach from Vertical Post	standard, 51cm (20 inches)
Weight	Controller with Thermal Wand and Hose: 14.5 kg (32lbs.) Thermal Wand Stand Assembly: 7kg (5.5 lbs.) Thermal Cap: .45 kg (1lb.)
Noise Level	<70dBA