DetailsMaxim

QuadTech Guardian 6000 Plus Electrical Safety Analyzer

The Guardian 6000 Plus is able to perform several dielectric tests in one unit including AC/DC Hipot, Insulation Resistance, Ground Bond, Open/Short Check and optional Leakage Current for compliance testing of IEC, UL, TUV, CSA, EN and other standards including IEC60601-1, UL2601-1, IEC950, UL544, UL60950. The time-saving TwinPort feature performs Hipot and Ground Bond simultaneously cutting time for these tests in half.  The open / short check function (OSC) checks for an open connection or a DUT short during testing.  Open connections may cause a bad DUT to test OK.  Screening for shorts prevents damage to the equipment saving potential costs that may occur. These patented features are only available in safety products manufactured by Chroma.

Quantity:

Feature Specification

Five instruments in one: AC Hipot , DC Hipot, Insulation Resistance, Ground Bond and Leakage Current (Option)
Twin-Port™ feature (Patented)
Programmable output voltage to 5kV AC and 6kV DC
Insulation resistance to 50GO/1000V DC
Ground bond up to 30A (Option up to 40A / 60A)
Open/Short check (OSC) function
ARC detection (Flashover)
Password Protected front panel lockout
Storage of 50 Tests Setups with 100 Steps per setup
Optional dynamic leakage current auto scanning
Standard RS-232 Interface
Standard GB OFF.S.ET KIT, SCANNER Interface
Optional GPIB Interface

Withstanding Voltage Test
Output Voltage	DC:0.05 ~ 6kV , AC : 0.05 ~ 5kV
Load Regulation	±(1% of reading +0.1% of range)
Voltage Regulation	2V
Voltage Accuracy	±(1% of reading +0.1% of range)
Cutoff Current	DC : 20mA , AC : 40mA
Current Resolution	0.1 μA DC
Current Accuracy	±(1% of reading +0.1% of range)
Output Frequency	50Hz / 60Hz
Test Time	0.3 ~ 999 sec , continue
Ramp Time	0.1 ~ 99.9 sec, Off
Fall Time	0.1 ~ 99.9 sec, Off
Waveform	Sine wave
Insulation Resistance Test
Output Voltage	DC : 0.05 ~ 1kV
Voltage Resolution	2V
Voltage Accuracy	±(2% of reading +0.5% of range)
IR Range	1MΩ ~ 50GΩ
Resistance Resolution	0.1MΩ
Resistance Accuracy	5% typical
Ground Bond Test
Output Current	AC : 1 ~ 30A (40A, 60A optional)
Current Accuracy	±(1% of reading +0.2% of range)
GR Range	10mΩ ~ 510mΩ
Resistance Resolution	0.1mΩ
Resistance Accuracy	± (1% of reading + 0.1% of full scale)
Test Method	4 wires
General
Operation Environment Temperature	0°C ~ 40°C, Humidity : ± 80 % RH
Power Consumption	No load : < 100 W With rated load : 800 W
Power Requirements	90~132Vac or 198~264Vac, 47~66Hz
Weight Approx.	20KG(19032) 25KG (19032-P)