|
General Specifications
|
|
Weight, with battery
|
0.86 kg (1.9 lb)
|
|
Dimensions
|
19.1 x 15.2 x 4.4 cm (7.5 x 6.0 x 1.75 in)
|
|
Display
|
LCD touch screen, 640 x 480 pixels, TFT (active) color panel, touch pad
|
|
LED indicators
|
6 (including power LED)
|
|
Carrying Case
|
Rugged carrying case for mainframe and standard accessories
|
| |
|
|
Power
|
|
Battery
|
Lithium Ion 7.2V DC (nominal), 4.2Ah, removable/rechargeable
|
|
Battery life
|
4 hour typical, 10 hour in standby mode
|
|
External AC adapter/battery charger
|
AC input: 90 to 264 V ac, 48 to 62 Hz; 1.5 A
|
|
|
DC output: 15 V dc, 1.2 A (isolated output)
|
|
Auto Charger
|
12V “cigarette lighter” charger with 6 foot (1.8 m) fully extended coiled cord and LED power indication
|
| |
|
|
Ports
|
|
Communication and accessory ports
|
1 USB (supports out-of-band NIC for remote control), 1 PCMCIA/Cardbus (PC Card type II), 1 SFP cage, 1 CompactFlash (Card Type I/II), 1 DB-9 serial, headphone jack, microphone jack, Kensington lock receptacle
|
|
RJ-45 / Copper Port
|
RJ-45 10/100/1000BASE-T Ethernet.
LAN option must be enabled to activate the copper port.
|
|
Fiber Port
|
Small Form-factor Pluggable (SFP) in accordance with MSA.
Fiber option must be enabled to activate the fiber port.
|
|
Supported SFP Modules
|
1000BASE- LX, SX, ZX, BX, 100BASEFX.
Transceiver models MS-SX, MS-LX, and MS-100FX require EtherScope software version 4.0 or higher.
|
|
SFP Connector
|
Duplex LC
|
| |
|
|
Environmental and safety
|
|
Operating Temperature
|
0° to +50°C (32° to 122°F) with up to 95% relative humidity
|
|
Battery Charging
|
10° to +40°C (50° to 104°F) with up to 95% relative humidity
|
|
Temperature
|
|
|
Storage temperature
|
-20° to +60°C (-4° to 140°F)
|
|
Shock and vibration
|
Meets requirements of MIL-PRF-28800F for Class 3 equipment
|
|
Safety
|
CSA Canada and United States, CE, FCC Part 15 Class A, C-TICK N10140; UL and CSA approvals for universal AC adapter.
EMC Complies with EN61326, Class A, Criteria C
|
| |
|
|
Copper media
|
|
Cable types
|
Unshielded twisted pair LAN cables (100 and 120 Ohm UTP)
|
|
|
Foil-screened twisted pair LAN cables (100 and 120 Ohm ScTP)
|
|
Cable length
|
1 to 305 m (3 to 1000 ft), accuracy dependent upon the cable type selected
|
|
Length resolution
|
± [5% of reading + 1 m (3 ft)], with open, shorted, with wire map adapter, or terminated with reflection = 20%
|
|
Receive level
|
100 to 5000 mVp-p
|
|
Datalink signal
|
500 to 4000 mVp-p
|
|
Measuring terminated cables
|
The Cable Verification feature tests the individual twisted-pairs of a cable that are terminated into most equipment vendor's Ethernet ports such as on a hub, switch or NIC. All cable tests other than WireView wire map and office locator ID are operational in the presence of datalink signal.
|
|
Wiremapper/office locator compatibility
|
Detects combinations of shorts, opens, and connector miswires. Compatible with Fluke Networks WireView wire map adapter/office locator.
|
|
Fault tolerance
|
The RJ-45 Ethernet connection on the analyzer is designed to withstand a maximum of 100 volts.
|
| |
|
|
Fiber optic power measurements
|
|
Receive Input Power, Transmit Output Power, Temperature, Voltage, TX Bias Current
|
Real time access to digital diagnostic monitoring of SFP operating parameters in accordance with the SFP Multi Source Agreement (MSA) and SFF-8472.
|
| |
|
|
ProVision™ Tests
|
|
Compatible remote devices
|
EtherScope, MetroScope, LinkRunner PRO/Duo with reflector, layer 1 loopback, 802.3ah device
Note: An EtherScope with v5 software or a LinkRunner Duo is required for 16K jumbo frame testing.
|
|
Test Configuration
|
Each test may be made up of an unlimited number of suites which run sequentially. Each suite may measure a maximum of eight streams total (including upstream and downstream) from one to four peer devices or a maximum of four streams (roundtrip) from one to four reflectors.
|
|
Test Duration
|
Each suite can run for any length of time from 1s to 24h. Suites may be run sequentially for virtually unlimited test lengths.
|
|
Tests
|
Throughput, Latency, Jitter, Loss/BERT, measured in parallel
|
|
Application port
|
User defined, per stream
|
|
Frame content
|
All 0s, all 1s, alternating 1s and 0s, Pseudo Random Bit Sequence (PRBS), Incrementing Byte, HFPAT, LFPAT, MFPAT, LCRPAT, SCRPAT
|
|
Frame size
|
48, 64, 128, 256, 512, 1024, 1280, 1518, 2024, 9000, RFC-2544 sweep, Jumbo sweep, or user-defined including jumbo sizes up to 16000
|
|
Rate (bps)
|
Up to 1000 Mbps (selectable per stream)
|
|
802.1Q settings
|
VLAN Id, QoS with CoS and ToS , QinQ VLAN Id, priority for each individual stream or all streams. Programmable TPID, DEI, CFI and VID for all streams
|
|
IP TOS settings
|
IP Precedence/TOS parameter, DiffServe Code Point
|
|
Pass/Fail Limits
|
Throughput (separate upstream and downstream), Latency, Jitter, Loss/BERT
|
|
Summary Display
|
Summary matrix of all streams and all measurements; IP/Mac addresses, VLANPriority/TOS, status,Tx and Rx rates in bps and fps, frames sent and lost, loss ratio, errored intervals; current, average, maximum latency and jitter.
|
|
Detailed Display
|
Individual measurements may be shown in tabular (by frame size), graphical (by frame size) or trending (by current interfal or total test duration for all frame sizes).
|
|
Frame Loss Statistics
|
Total, current, and maximum for: frames sent and lost, loss ratio, BER, errored intervals, severely errored intervals
|
|
Data Export
|
Throughput, Frames Sent/Received, Loss, Delay and Jitter test results for each stream are time stamped and saved to the CD card once per measurement interval for the duration of the test.
|
| |
|
|
RFC 2544 Performance Tests
|
|
Compatible remote devices
|
EtherScope, MetroScope, LinkRunner PRO/Duo with reflector, layer 1 loopback, 802.3ah device
|
|
RFC-2544 Compliant Tests
|
Throughput, Latency, Frame Loss, Back-to-Back
|
|
Additional Performance Tests
|
Loss Rate, Jitter, FrameBERT
|
|
Frame content
|
All 0s, all 1s, alternating 1s and 0s, Pseudo Random Bit Sequence (PRBS), Incrementing Byte, HFPAT, LFPAT, MFPAT, LCRPAT, SCRPAT
|
|
Frame size
|
64, 128, 256, 512, 1024, 1280, 1518, 9000, RFC-2544 sweep, Jumbo sweep, or user-defined including jumbo sizes up to 16000
|
|
Application port
|
User defined
|
|
Rate (bps)
|
Up to 1000 M
|
|
802.1Q settings
|
VLAN Id, priority
|
| |
|
|
IP TOS settings
|
IP Precedence/TOS parameter, DiffServe Code Point
|
|
Throughput settings
|
Duration, maximum rate, measurement accuracy, pass/fail limits
|
|
Latency settings
|
Duration, rate, iterations, pass/fail limits
|
|
Frame loss settings
|
Duration, rate, step size, pass/fail limits
|
|
Frame loss settings
|
Duration, rate, step size, pass fail
|
|
Back to Back settings
|
Min and Max duration, rate, iterations, pass/fail limits
|
|
Loss Rate
|
Duration, rate, pall/fail limits
|
|
Jitter Settings
|
Duration, rate, pass/fail limits
|
|
FrameBERT Settings
|
Duration, rate, pass/fail limits
|
| |
|
|
Server Response Tool
|
|
TCP Port Response
|
DNS Name, IP address, port name, port number, port responsiveness
|
|
TCP Trace Route
|
Hop Count, router name, IP address, average RTT and percentage of total RTT
|
| |
|
|
Internetwork Throughput Option
|
|
Compatible remote device
|
EtherScope, MetroScope, LinkRunner PRO/Duo with reflector option, OptiView v3 Integrated Network Analyzer, OneTouch Series II
|
|
Frame content
|
All 0s, all 1s, alternating 1s and 0s, Pseudo Random Bit Sequence (PRBS)
|
|
Frame size
|
64, 128, 256, 512, 1024, 1280, 1518, sweep of all sizes
|
|
Rate (bps)
|
12336 to 1000 M
|
|
Duration(s)
|
1 to 64,800 (18hr)
|
|
Results
|
Frames sent, received, rate and percent loss for both upstream and downstream directions
|
|
Results format
|
Tabular, graphical, xml-based report
|
| |
|
|
Traffic generator
|
|
Traffic type
|
Broadcast, multicast or unicast, FCS errors
|
|
Frame type
|
Layer 1 FLUKE, Layer 2 FLUKE, Layer 3 FLUKE, Benign Ethernet, Benign LLC, NetBEUI, Benign IP, IP/ICMP Echo, IP/UDP Echo, IP/UDP Discard, IP/UDP Chargen, IP/UDP NFS, IP/UDP NetBIOS
|
|
Frame size
|
48, 64, 128, 256, 512, 1024, 1280, 1518, 9000, user defined up to 16000B
|
|
Rate
|
Utilization (%): >0 – 100, Frames/second: 1 – 1488095
|
|
Duration
|
Seconds: 1 – continuous, Frames: 1 – continuous
|
| |
|
|
Service Performance Tool
|
|
Category of devices tested
|
DHCP Servers, DNS Servers, E-mail Servers (SMTP, POP3), FTP Servers, NT File Servers, Web Servers, WINS Servers, User-Defined Servers
|
|
Test controls
|
Iterations, interval
|
|
Add device by
|
IP address or host name (except Web Server where URL added)
|
|
DHCP Server pass/fail criteria
|
Ping response time, server response time
|
|
DHCP Server BOOTP parameters (optional)
|
Subnet mask, domain server, WINS server, NetBIOS scope, POP3 server, router/default gateway, client DNS domain, NetBIOS node type, SMTP server, web server
|
|
DNS Server pass/fail criteria
|
Ping response time, server response time
|
|
E-mail Server pass/fail criteria
|
Ping response time, SMTP SYN/ACK response time, SMTP response time, POP3 SYN/ACK response time, POP3 response time
|
|
E-mail Server operation modes
|
Connect only, log in only, send/receive
|
|
FTP Server pass/fail criteria
|
Ping response time, SYN/ACK response time, connect time, disconnect time, delete file time, write rate, read rate
|
|
FTP Server operation modes
|
Server response, read, write/read/delete
|
|
NT File Server pass/fail criteria
|
Ping response time, SYN/ACK response time, connect time, disconnect time, delete file time, write rate, read rate
|
|
NT File Server operation modes
|
Server response, read, write/read/delete
|
|
Web Servers pass/fail criteria
|
Web Server name lookup time, ping response time, SYN/ACK response time, first reply time, receive time, receive rate
|
|
WINS Servers pass/fail criteria
|
Ping response time, server response time
|
|
User-Defined Servers pass/fail criteria
|
Ping response time, SYN/ACK response time
|
|
Results format
|
Tabular, graphical, xml-based report
|
| |
|
|
802.3ah Client
|
|
Functions
|
Remote device discovery, loop-up with 1s keep-alive, loop down. May be run in background while other MS functions are active.
|
|
Display
|
Loopback capability of remote, OAM status OAM mode link status, maximum OAM size, remote state
|
| |
|
|
IPTV Tests
|
|
Configuration
|
Multicast Group IP, Port Number, join, leave, RTSP URL, setup, play, pause, teardown
|
|
Results
|
IGMP Latency, Total Packets Sent, Connected Time, Received Packet Rate, RFC-4445 MDI Delay Factor and Media Loss Rate for MPEG-2 streams
|
| |
|
|
Instrument Settings
|
|
TCP/IP
|
DHCP, static
|
|
Management TCP/IP
|
DHCP, static (management using USB Ethernet adapter purchased separately)
|
|
802.1Q
|
LAN: S-VLAN, C-VLAN, TPID, Priority, DEI, VID
|
|
IP Type Of Service (TOS)
|
LAN: IP precedence, DSCP
|
|
Security
|
LAN: 802.1X
WLAN: 802.1X, WEP, WPA PSK, 802.11i PSK, WPA, WPA2
|
|
802.1X EAP type
|
TLS, GTC, MD5, MSCHAPV5, PEAP GTC, PEAP MD5, PEAP MS-CHAP-V2, PEAP TLS, TTLS PAP, TTLS CHAP, TTLS MSCHAP, TTLS MSCHAP-V2, TTLS EAP-MD5, TTLS EAP-GTC, TTLS-EAP-MSCHAP-V2, TTLS EAP-TLS, EAP FAST
|
|
Active tests
|
LAN: User defined tests to appear on detailed view home page and drop down navigation
|
|
SNMP
|
LAN: v1, v2, v3 (with SHA and MD5 authentication, DES encryption)
|
|
Ethernet
|
LAN: Auto-negotiation, force setting, MAC address
|
|
Instrument security
|
Password control for remote UI, ProVision and RFC2544 tests, SNMP settings, and 802.1X
|
|
General
|
Enable as remote, advanced remote NAT/Proxy settings, user preferences
|
|
Group names
|
WLAN: assign alias to one or more devices
|
|
Tools
|
|
LAN
|
Ping, trace route, trace switch route, traffic generator, web browser, telnet, SSH telnet, terminal, FTP, TFTP, xDP port reporter (CDP, LLDP), Service Performance Tool, Remove CF Card, Lock Screen, Report
|
|
WLAN
|
Ping, trace route, web browser, telnet, SSH telnet, terminal, FTP, TFTP, wireless throughput, report
|
|
Wireless LAN Adapter Card
|
|
Specification compliance
|
IEEE 802.11a, 11b, 11g
|
|
Certifications
|
FCC part 15, Telec, CTICK, ETSI, EN301893, EN60950
|
|
Interoperability
|
WECA Compliant
|
|
Interface
|
32-bit Cardbus
|
|
Outdoor operating range
|
Up to 515 m (1690 ft)
|
|
Indoor operating range
|
Up to 85 m (279 ft)
|
|
Data rate
|
802.11a: up to 54 Mbps, 802.11b: up to 11 Mbps, 802.11g: up to 54 Mbps
|
|
Output power
|
18 dBm peak power
|
|
Infrastructure mode
|
BSS
|
|
External antenna connector jack
|
Hirose MS-147
|
|
Wireless LAN Directional Antenna
|
|
Frequency range
|
2.4 – 2.5 and 4.9 - 5.9 GHz
|
|
Minimum gain
|
5.0 dBi in the 2.4 GHz band and 7.0 dBi in the 5 GHz band
|
|
External antenna connector plug
|
Hirose MS-147
|
![](javascript:addcart({"pid":1021,"pname":"Rohde & Schwarz FSL18 Spectrum Analyzer 9 kHz - 18 GHz","image":"/uploads/2019/06/rs_fsl18_pic2.png"})){kind=link}
![](javascript:addcart({"pid":1020,"pname":"Rohde & Schwarz FSL6 Spectrum Analyzer 9 kHz - 6 GHz","image":"/uploads/2019/06/rs_fsl6_pic2.png"})){kind=link}
![](javascript:addcart({"pid":1019,"pname":"Rohde & Schwarz FSL3 Spectrum Analyzer 9 kHz - 3 GHz","image":"/uploads/2019/06/rs_fsl3_pic2.png"})){kind=link}
![](javascript:addcart({"pid":1018,"pname":"Rohde & Schwarz FSL-series Spectrum Analyzers 9 kHz - 18 GHz","image":"/uploads/2019/06/rs_fsl-series_pic2.png"})){kind=link}
![](javascript:addcart({"pid":1016,"pname":"Rohde & Schwarz FSH20 Spectrum Analyzer 9 kHz - 20 GHz","image":"/uploads/2019/06/rs_fsh20.png"})){kind=link}
![](javascript:addcart({"pid":1015,"pname":"Rohde & Schwarz FSH13.6 Spectrum Analyzer 9 kHz - 13.6 GHz","image":"/uploads/2019/06/rs_fsh13.png"})){kind=link}
![](javascript:addcart({"pid":1014,"pname":"Rohde & Schwarz FSH8 Spectrum Analyzer 9 kHz - 8 GHz","image":"/uploads/2019/06/rs_fsh8.png"})){kind=link}
![](javascript:addcart({"pid":1013,"pname":"Rohde & Schwarz FSH4 Spectrum Analyzer 9 kHz - 3.6 GHz","image":"/uploads/2019/06/rs_fsh4.png"})){kind=link}
![](javascript:addcart({"pid":1012,"pname":"Rohde & Schwarz FSH-series Spectrum Analyzers 9 kHz - 20 GHz","image":"/uploads/2019/06/rs_fsh-series.png"})){kind=link}
![](javascript:addcart({"pid":1011,"pname":"Rohde & Schwarz FSC6 Spectrum Analyzer 9 kHz - 6 GHz","image":"/uploads/2019/06/rs_fsc6.png"})){kind=link}
![](javascript:addcart({"pid":1010,"pname":"Rohde & Schwarz FSC3 Spectrum Analyzer 9 kHz - 3 GHz","image":"/uploads/2019/06/rs_fsc3.png"})){kind=link}
![](javascript:addcart({"pid":1009,"pname":"Rohde & Schwarz FSC-series Spectrum Analyzer 9 kHz - 6 GHz","image":"/uploads/2019/06/rs_fsc-series.png"})){kind=link}
![](javascript:addcart({"pid":1008,"pname":"Rohde & Schwarz FPS40 Signal & Spectrum Analyzer 10 Hz - 40 GHz","image":"/uploads/2019/06/rs_fps40.png"})){kind=link}
![](javascript:addcart({"pid":1007,"pname":"Rohde & Schwarz FPS30 Signal & Spectrum Analyzer 10 Hz - 30 GHz","image":"/uploads/2019/06/rs_fps30.png"})){kind=link}
![](javascript:addcart({"pid":1006,"pname":"Rohde & Schwarz FPS13 Signal & Spectrum Analyzer 10 Hz - 13.6 GHz","image":"/uploads/2019/06/rs_fps13.png"})){kind=link}
![](javascript:addcart({"pid":1005,"pname":"Rohde & Schwarz FPS7 Signal & Spectrum Analyzer 10 Hz - 7 GHz","image":"/uploads/2019/06/rs_fps7.png"})){kind=link}
![](javascript:addcart({"pid":1004,"pname":"Rohde & Schwarz FPS4 Signal & Spectrum Analyzer 10 Hz - 4 GHz","image":"/uploads/2019/06/rs_fps4.png"})){kind=link}
![](javascript:addcart({"pid":1003,"pname":"Rohde & Schwarz FPS-series Signal & Spectrum Analyzers 10 Hz - 40 GHz","image":"/uploads/2019/06/rs_fps-series.png"})){kind=link}
![](javascript:addcart({"pid":1002,"pname":"Rohde & Schwarz FPL1007 Spectrum Analyzer 5 kHz - 7 GHz","image":"/uploads/2019/06/rs_fpl1007_pic2.png"})){kind=link}
![](javascript:addcart({"pid":1001,"pname":"Rohde & Schwarz FPL1003 Spectrum Analyzer 5 kHz - 3 GHz","image":"/uploads/2019/06/rs_fpl1003_pic2.png"})){kind=link}