DetailsMaxim

Kaelus CIS-0001A Passive Intermodulation (PIM) Source

Passive Intermodulation (PIM) Source * the Nominal PIM level for the PIM Source can vary within the range shown. The Nominal PIM level will be repeatable within ± 3dB for subsequent PIM measurements within the same frequency band.

Quantity:

Feature Specification

Passive Intermodulation (PIM) test source
Repeatable high PIM level over wide frequency range
Used to verify PIM test equipment operation
Used to calibrate Range to Fault module for PIM testing
Rugged shock proof design
Heat shield for personal protection
Dust cover for prolonged life

Frequency Range	500MHz – 2300MHz
RF impedance	50 ohms
Return loss	18dB min
Nominal PIM level*	As per graph
RF power rating	10W, continuous \| 50W, 3 mins
Connector	7/16 Male
Mating torque	Install slightly more than hand tight to the RF output port of the PIM Analyzer. Tightening with a 7/16 DIN torque wrench is not recommended.
Operating temperature range	-10° to +50° C
Dimensions (L x D)	190 x 60mm (7.48 x 2.36in)
Weight	0.5kg (1.0lb)

*The Nominal PIM level for the CIS-0001A can vary within the range shown. The Nominal PIM level will be repeatable within ± 3dB for subsequent PIM measurements at a specific frequency.