TECHNICAL DETAILS |
OUTPUT |
RF output |
N connector at the front panel |
Output power |
Built-in amplifier 110 W (nominal) |
Gain amplifier |
> 50 dB |
Output impedance |
50 ohm |
Harmonic distortion |
< -20 dBc at max. power |
Insertion loss |
Approx. 1 dB (directional coupler + RF relay) |
SIGNAL GENERATOR |
Output level |
-63.5 dBm to 0 dBm |
Frequency range |
9 kHz to 1 GHz |
Output impedance |
50 ohm |
Direct RF output |
To control an external amplifier |
TEST FREQUENCIES |
Frequency range |
9 kHz - 400 MHz (built-in amplifier) 9 kHz - 1,000 MHz (ext. amplifier) |
Unmodulated signal |
CW (continuous wave) |
Amplitude modulation |
Frequency: 1 Hz to 3,000 Hz, Index: 1% to 95%, |
Pulse modulation |
Frequency: 1 Hz to 3,000 Hz Index: 10% to 80% |
DUAL DIRECTIONAL COUPLER |
Dual directional coupler |
Included to measure forward power and reverse power |
Frequency range |
10 kHz to 1 GHz |
Power |
200 W max. |
Insertion loss |
0.6 dB max. |
Mainline VSWR |
1.1:1 max. |
MEASUREMENT |
PM 1000 |
3-channel power meter up to 1 GHz |
Forward power |
Internal power meter #1, -10 dBm to +52 dBm |
Reverse power |
Internal power meter #2, -10 dBm to +52 dBm |
Injected current (Monitor) |
Internal power meter #3, -45 dBm to +13 dBm |
TIME PARAMETERS |
Dwell time |
td = 0.3 s - 9,999 s |
Pause time |
tr = 0/0.3 s - 9,999 s |
INTERFACE |
Serial interface |
USB |
Parallel interface |
IEEE 488, addresses 1 - 30 |
Fail 1 |
BNC input; test will be stopped (active low) |
Fail 2 |
BNC input; test status will be saved (max. 10 events) when active low. Test continues |
GENERAL DATA |
Dimensions, weight |
19""/6 HU, 31.6 kg |
Supply voltage |
115 V or 230 V +10/-15 %, 50/60 Hz |
Input power |
Max. 1430 W Inrush |
Power factor |
cos(phi) = 0.96 at max. output power as per IEC 555 |
Fuses |
2x6.3 AT (115 V) or 2x6.3 AT (230 V) |