| MODEL OVERVIEW | 
| OCS 500N6F.1 | AC 250 V / 16 A, DC 250 V / 32 A | 
| FAST DAMPED OSCILLATORY MODULE | 
| FAST DAMPED OSCILLATORY WAVES AS PER IEC/EN 61000-4-18 | 
| Voltage (o.c.) at HV output | 450 V - 4,400 V ±10% | 
| Rise time | 5 ns ±30% | 
| Oscillation frequencies | 3 MHz, 10 MHz and 30 MHz, ±10% | 
| Decaying | Peak 5 to be > 50% of peak 1 value
Peak 10 to be < 50% of peak 1 value | 
| Source impedance | 50 ohms ±20% | 
| Coupling | common mode | 
| Polarity | Positive, negative | 
| Repetition rate | Max. 5,000 /s ±10% | 
| Burst duration | 50 ms ±20%, at 3 MHz
15 ms ±20%, at 10 MHz
5 ms ±20%, at 30 MHz | 
| Burst period | 300 ms ±20% | 
| Short-circuit current | 9 A - 88 A ±20% | 
| Rise time current waveform | < 330 ns at 3 MHz
< 100 ns at 10 MHz
< 33 ns at 30 MHz | 
| Decaying (current) | Peak 5 to be > 25% of peak 1 value
Peak 10 to be < 25% of peak 1 value | 
| GENERAL SPECIFICATIONS | 
| OUTPUT | 
| Direct | Via HV-safety lab connectors | 
| Coupling mode | Line to line Line(s) to ground (PE) | 
| DUT supply | 
| OCS 500N6F.1 | AC: 250 V / 32 A; 50/60 Hz
DC: 250 V / 32 A | 
| CRO trigger | 5V trigger signal for oscilloscope | 
| MEASUREMENTS | 
| Ring wave | Peak voltage and peak current in LCD | 
| GENERAL DATA | 
| INTERFACE | 
| Optical interface | Opto link, 3 m cable USB A connector | 
| Parallel interface | IEEE 488, addresses 1 - 30 | 
| GENERAL DATA | 
| Dimensions, weight | 19"" / 9 HU, approx. 32 kg | 
| Supply voltage | 115/230 V +10/-15% | 
| Fuses | 2 x T2AT (230V); 2 x T4AT (115V) |