| TECHNICAL DATA |
| RCB 200N1 |
Circuitry as per Annex F, Figure F-1 with the following components: |
| Resistor R1 |
51 ohms, 25W |
| Resistor R2 |
220 ohms ± 5%, 2W |
| Resistor R3 |
33 ohms ± 5%, 10W |
| Resistor R4 |
6 ohms ± 5%, 50W |
| Capacitor C1 |
100 nF capacitor, 400V |
| Inductor L1 |
5 uH inductor (Osborne transformer part no. 8745) |
| Inductor L2 |
100 mH inductor (Osborne transformer part no. 32416) |
| Diode D1 |
Zener diode, 39V, 5W |
| Transistor Q1 |
NPN transistor |
| SW0 - SW4 |
Single Throw Switch |
| RLY1 |
12-volt AC relay, NC contact used Potter & Brumfield KUP-14A15-12) |
| OPERATION |
| TEST ON |
Activates the DUT supply for CI 220 and CI 260 test pulses; no function for RI 130 as this is performed without DC voltage |
| ID |
To select the test |
| Pulse |
To select the pulses of the preset test |
| Mode |
To select the mode of generating the pulses |
| Start/Stop |
To start/stop the test |
| INPUTS/OUTPUTS |
| Input |
4mm safety lab connectors for DC supply (e.g. battery or VDS 200x) |
| Trigger |
External trigger input (BNC) |
| Outputs |
4mm safety lab connectors for CI 220 and CI 260 testing; 50-ohm BNC connectors for RI 130 testing |
| LEDs |
Indicates:
- TEST ON status
- Test (ID)
- Pulse
- Mode
- Sequence or endless
- Switching status (SW0 - SW4)
- Relay EOL (end of life reached) |
| GENERAL DATA |
| Dimensions
Weight |
330mm x 230mm x 115mm
Approx. 7.5kg |
| Fuse |
20A for DUT supply current |
| Protection |
Electronically protected against overvoltage and reversed polarity |