DetailsMaxim

solar 8282-1 Transient Pulse Generator

For Conducted Transient Susceptibility Testing, 0.15 µS - 5.0 µS - 10.0 µS up to 600 volts (peak)

The Solar 8282-1 Transient Pulse Generator was designed for screen room use in making conducted spike susceptibility tests. It provides all the wave shapes required by MIL-STD-461B/C and many other military EMI specifications.

Spike generators required for susceptibility testing have been our specialty since 1962, when our first unit, the Model 6254-1, was introduced. The Model 8282-1incorporates all the flexibility and technical excellence of the previous models and provides features required by specification MIL-STD-461B/C.

Quantity:

Feature Specification

Provides outputs up to 600 volts peak amplitude for the 0.15, 5.0 and 10.0 µS spikes into a five ohm resistive load (low source impedance).
A wide range of repetition rates allows spike injection in terms of the pulse rates of items being tested.
The single pulse feature enables controlled isolation of transient effects.
Adjustable pulse position on AC power lines relates the transient susceptibility to the real time aspects of digital circuitry served by AC power.
Transients can be injected in synchronism with repetitive circuit functions as required by Method CS06 of MIL-STD-462.
Remote triggering of single or repetitive pulses in terms of particular system characteristics.
The upper terminals of the PARALLEL pair and the SERIES pair provide a positive-going spike on the 5 µS and the 10 µS modes. These terminals deliver a negative-going spike in the 0.15 µS mode. When the test plan requires both a positive and a negative spike, it is necessary to reverse the connections to the output terminals of the Model 8282-1 Spike Generator.

Spike Durations	Pushbutton selectable durations of 0.15 µS, 5.0 µS and 10.0 µS (±20%) to zero crossover, into 5.0 ohm resistive load
Adjustable Peak Amplitude	Up to 600 volts for 0.15 µS, 5.0 µS and 10.0 µS durations into five ohm non-inductive load
Internal Impedance	Less than 5.0 ohms for 0.15 µS, less than 2.0 ohms for 5.0 µS, less than 1.0 ohm for 10.0 µS
Pulse Repetition Rate	Less than 5.0 ohms for 0.15 µS, less than 2.0 ohms for 5.0 µS, less than 1.0 ohm for 10.0 µS
Pulse Shape	Ringing characteristic similar to Figure 19 in MIL-STD-462 when connected to non-inductive load
Pulse Position	Adjustable from 0° to 360° on 50 Hz, 60 Hz or 400 Hz power lines
External Sync Operation	Remotely trigger able up to 50 p.p.s. for 0.15 µS, up to 1000 p.p.s. for 5.0 and 10.0 µS
Amplitude Display	Panel meter is analog LED display of peak amplitude as it would be into a five ohm resistive load
Power Current in Series Injection Mode	up to 50 amperes of current at power frequencies
Power Requirements	115 volts 60 Hz, 3.0 amperes (230 volts 50 Hz, 1.5 ampere available)
Size	12.25"" wide , 8.7"" high 13"" deep (311 mm x 211 mm x 330 mm)
Weight	30 pounds

solar 8282-1 Transient Pulse Generator

Related Products

Haefely Hipotronics AXOS 8 Compact Immunity Test System

Haefely Hipotronics AXOS-series Conducted Immunity Test Systems

AE Techron DSR 100-series Dropout, Surge, Ripple Simulator and AC/DC Voltage Source

AE Techron 4301-series Telecom Test Systems for GR-1089 Section 10

AH Systems CPF-633 Current Probe Fixture 20 Hz - 500 MHz

AH Systems CPF-632 Current Probe Fixture 20 Hz - 500 MHz

Teseq CIP 9138 Current Injection Probe 4 kHz - 200 MHz

EM TEST vsurge NX20 Surge Generator

EM TEST VSS 500N6.4 Voltage Surge Generator

EM TEST VSS 500N15.3 Voltage Surge Simulator

EM TEST VSS 500N12.7 Voltage Surge Simulator

EM TEST VSS 500N12.6 Voltage Surge Simulator

EM TEST VSS 500N12.1 Voltage Surge Simulator

EM TEST VSS 500N12 Voltage Surge Simulator

View all

MAXIM INSTRUMENTS