| GENERAL DATA |
| Control power |
85 V - 264 V
50/60 Hz |
| User test storage |
unlimited |
| Remote interface |
Ethernet, RJ45 |
| Display |
7“/ 800x480 / 24 bit with touch-screen |
| USB |
for USB memory stick |
| AUX. interface |
D-sub 37p for external CDN, external transformer etc. |
| External trigger input |
5 V TTL |
| Synch input |
BNC, 10 V - 264 V AC |
| Trigger output |
5 V TTL |
| External start / stop input |
5 V TTL, starts / stops predefined test sequence |
| EUT failed input |
5 V TTL |
| Analog output |
0 - 10 V, for use with external options |
| Warning lamp output |
2 x 24 V / 1 A DC |
| Safety circuit |
stops the test when unlocked |
| Dimensions |
19“/ 4U |
| (W x H x D) |
45 x 18 x 49 cm |
| Weight |
30 kg |
| IEC / EN 61000-4-4 EDITION 2 EFT / BURST |
| Output voltage |
0.2 - 5.0 kV ±10% at coaxial output |
| Spike frequency |
1 Hz - 1 MHz |
| Polarity |
pos / neg / alternate |
| Burst duration |
10 us - 1 s |
| Output impedance |
50 Ohms |
| Burst period |
1 ms - 10 s |
| Rise time |
5 ns ±30% |
| Test time |
1 s- 999 minutes |
| Impulse duration |
50 ns ±30% at 50 Ohm
50 ns -15 +100 ns at 1000 Ohm |
| Trigger |
automatic, manual,
external trigger input |
| Burst mode |
normal, continuous, real, random |
| Integrated single phase coupling / decoupling network |
264 V AC / 16 A
220 V DC / 10 A |
| IEC / EN 61000-4-5 EDITION 2 & 3 SURGE COMBINATION WAVE |
| Output voltage |
0.2 - 7.0 kV ±10% Output current 0.1 - 3.5 kA ±10% |
| Voltage rise time |
1.2 μs ±30% Current rise time 8 us ±20% |
| Voltage duration |
50 μs ±20% Current duration 20 us ±20% |
| Polarity |
pos / neg / alternate |
| Integrated single phase CDN |
264 V AC / 16 A
220 V DC / 10 A |
| Output impedance |
2 Ohms |
| Phase synch |
0 - 359° with 1° steps or asynchronous mode |
| Impulse trigger |
automatic 2 s - 100 min
manual external trigger input |
| Counter preselect counter |
1 - 1000 / infinite |
| Counter |
100000 |
| Peak voltage monitor |
BNC output: 1000:1
display: 3 digits |
| Peak current monitor |
BNC output: 1 kA/V
display: 3 digits |
| IEC / EN 61000-4-11 EDITION 2 AND IEC / EN 61000-4-29 DIPS & INTERRUPTS |
| Max. voltage |
264 V AC/DC |
| Interrupt time
|
0.5 period - 800 periods
100 μs - 1000 minutes |
| Max. current |
16 A AC/DC continuous
20 A for 5 s
23 A for 3 s
40 A for 3 s
> 500 A inrush current |
| Interval time |
1 period - 800 periods synch
100 μs - 1000 minutes asynch |
| Trigger |
Automatic
Manual external trigger input |
| Test time |
1 s - 1000 minutes infinite |
| Interrupt dip level |
0%
0% - 99% with external voltage source |
| Phase synch |
0 - 359° 16 / 40 / 50 / 60 Hz
asynchronous mode |
| RMS voltage monitor |
BNC output: 100:1
display: 4 digits |
| RMS current monitor |
BNC output: 10 A/V
display: 4 digits |
| IEC / EN 61000-4-12 EDITION 2 AND ANSI / IEEE C62.41 Ring Wave |
| Max. voltage |
0.2 - 7.0 kV ± 10% |
| Repetition rate |
Up to 30 pulses / min |
| Frequency |
100 kHz |
| Polarity |
Positive / negative / alternate |
| Rise time OC |
5 μs |
| Rise time SC |
1 μs |
| Floating output |
Max. 460 V / AC |
| Phase sync accuracy |
± 1° |
| Impedance |
12 Ohm, 30 Ohm |
| Damping rate |
0.4 < peak1/peak2 < 1.1
0.4 < peak3/peak2 < 1.1
0.4 < peak4/peak3 < 1.1 |
| Peak voltage monitor |
BNC output: 1000:1
Display: 3 digits |
| Peak current monitor |
BNC output: 1kA / V
Display: 3 digits |