DetailsMaxim

Tektronix THS3014 4 Channel 100 MHz Handheld Oscilloscope 2.5 GSa/s

With 4 isolated channels and up to 7 hours of battery life, the lightweight THS3000 Handheld Oscilloscope Series enables you to safely make floating or differential measurements on your bench or in the field. Now you can tackle tough environments with the performance you expect from Tektronix safely and affordably.

With up to 200 MHz bandwidth, 4 channels, and 5 GS/s maximum sample rate, no other oscilloscope offers as much bandwidth and sample rate in a portable handheld form factor. The THS3000 Handheld Oscilloscope Series has 10,000 points record length per channel, enabling you to capture more signal information at higher sample rates to clearly see signal details. For applications where it is important to measure slow-changing signals over long time periods, the THS3000 Series offers Roll mode that extends the record length to 30,000 points of signal information.

Quantity:

Feature Specification

100 MHz or 200 MHz Bandwidth Models
Maximum Sample Rates up to 5 GS/s and 200 ps Resolution
4 Fully Isolated and Floating Channels
600 VRMS CAT III, 1000 VRMS CAT II Rated Inputs (BNC to Earth Ground)
21 Automatic Measurements
Waveform Math and FFT Spectral Analysis
Volts, Time, Frequency, Watts Cursor Measurements
6 in. (153 mm) Bright Color Display
USB Device and Host Support
7 Hours of Continuous Battery Operation

Tektronix THS3014 Applications

Embedded Analog and Digital Design
Power Devices, Power Electronics, and Power Supply Design
Automotive and Avionics Design and Maintenance
Industrial Equipment Design and Installation
Field Test and Service

Vertical System Analog Channels

Characteristic	THS3014	THS3024
Isolated Input Channels	4	4
Analog Bandwidth (–3 dB)	100 MHz	200 MHz
Rise Time	3.5 ns	1.7 ns
Hardware Bandwidth Limits	20 kHz, 20 MHz, or full
Input Coupling	AC, DC
Input Impedance	1 MΩ ±1%, 14 pF ±2 pF
Input Sensitivity Range	2 mV/div to 100 V/div
Vertical Resolution	8 bits
DC Gain Accuracy	±2.1% of reading +0.04 × range/div for 5 mV/div to 100 V/div
Max BNC Input Voltage	(1 MΩ) 300 VRMS CAT III from BNC signal to BNC shell
Max Probe Voltage (with standard THP0301-X probe)	300 VRMS CAT III from 10:1 probe tip signal to BNC and reference lead
Float Voltage	1000 VRMS CAT II / 600 VRMS CAT III from BNC shell to earth ground
Trace Positioning	±4 divisions

Horizontal System

Characteristic	THS3014	THS3024
Maximum Sample Rate	2.5 GS/s (1.25 GS/s 4-ch)	5 GS/s (1.25 GS/s 4-ch)
Maximum Record Length (All channels)	10,000 points (30,000 points in Roll mode (4 ms to 2 min / div))
Time-base Range (s/div)	2 ns to 4 s	1 ns to 4 s
Delay Time Range	1 full screen (12 divisions) of pre-trigger or up to 100 screens (1,200 divisions) of post-trigger
Timing Accuracy	±100 ppm + 0.04 div
Zoom	Horizontally expand or compress a live or stopped waveform

Trigger System

Characteristic	Description
Input Source	Channel 1, 2, 3, or 4. All input references isolated from each other and earth ground
Main Trigger Modes	Auto-level, Auto, Normal, and Single
Trigger Coupling	DC, HF Reject, Noise Reject (reduces sensitivity)

Trigger Sensitivity

Characteristic

Description

Internal DC Coupled

0.5 divisions from DC to 5 MHz at >5 mV/div

1 divisions >5 MHz to 200 MHz (THS3024)

1 divisions >5 MHz to 100 MHz (THS3014)

Trigger Level Range

Characteristic	Description
Any Channel	±4.0 divisions

Trigger Modes

Mode	Description
Edge	Positive, negative, or dual slope on any input channel. Coupling includes DC, HF Reject, and Noise Reject
Pulse Width	Trigger on Channel 1, width of positive or negative pulses (glitches) that are >, <, =, or ≠ a specified period of time (resolution of 0.01 div with minimum time of 50 ns)
Event	Trigger on N-th occurrence of trigger (N selectable from 2 to 99)
Video	Trigger on Channel 1, line number, all lines, odd, even, or all fields on NTSC, PAL, PAL Plus, and SECAM signals
Non-interlaced	Trigger on Channel 1, high-res non-interlaced video with line frequencies from 14 kHz to 65 kHz

Acquisition Modes

Mode	Description
Sample (Default)	Acquire sampled values
Glitch Detect	Captures high frequency or glitches as narrow as 8 ns from 5 μs to 120 s / div
Averaging	Selectable from 2, 4, 8, or 64 waveforms
Roll	Scrolls waveforms right to left across the screen at sweep speeds slower than or equal to 4 ms/div
Data Recorder	Automatic data logging of 100 triggered records (screens) with date and time stamp. Store internally or to a USB device
Waveform Compare	Visually compare against user-definable reference waveforms or perform automatic Pass or Fail testing of 1 to 4 channels with data logging of test results

Automatic Setup

Mode	Description
Autoset	Single-button, automatic setup of all channels for vertical, horizontal, and trigger systems
Autorange	Continuous auto-setup of vertical, horizontal, and trigger systems that track signal changes

Waveform Measurements

Characteristic	Description
Cursors	Time, Freq (1/T), Volts, Watts, Rise/Fall Time from any input channel or math waveform
Automatic Measurements	21. Up to 4 can be displayed on-screen at any one time. Measurements include: V DC, V ACRMS, V AC+DC, VPeak Max, VPeak Min, Peak to Peak, A DC, A AC, A AC+DC, Frequency, Rise Time (using cursors), Fall Time (using cursors), Phase (between any 2 inputs), Positive Pulse Width, Negative Pulse Width, Positive Duty Cycle, Negative Duty Cycle, dBV, dBm into 50 Ω and 600 Ω
TrendPlot™	Records and graphically displays any 4 automatic scope measurements. Store internally or to USB flash drive for recall and analysis

Waveform Math

Characteristic	Description
Arithmetic	Add, subtract, and multiply waveforms
FFT	Spectral magnitude. Set FFT Vertical Scale to Linear or Logarithmic, and FFT Window to Automatic, Hamming, Hanning, or None

Display Characteristics

Characteristic	Description
Display Type	6 in. (153 mm) Liquid-crystal Color Display
Display Resolution	320 horizontal × 240 vertical pixels
Waveform Style	Vectors (dot-join), Dots, Envelope, Variable Persistence, Infinite Persistence
Display Format	YT and XY

Storage Memory

Characteristic	Description
Reference	4 user-definable reference traces
Waveform	Stores 30 internal scope records (4 traces each) with screen image and corresponding setup
Recording	Store 10 internal recordings that can be a 100-screen replay sequence, a Roll-mode recording, or a TrendPlot™ measurement recording
Screen Image	Store up to 9 internally or 256 BMP images to an external USB storage drive
Real-time Clock	Time and date stamp of all stored data

Tektronix THS3014 4 Channel 100 MHz Handheld Oscilloscope 2.5 GSa/s

Related Products

Tektronix TPS2024B 4 Channel 200 MHz Digital Oscilloscope 2 GSa/s

Tektronix TPS2014B 4 Channel 100 MHz Digital Oscilloscope 1 GSa/s

Tektronix TPS2012B 2 Channel 100 MHz Digital Oscilloscope 1 GSa/s

Tektronix THS3024 4 Channel 200 MHz Handheld Oscilloscope 5 GSa/s

Tektronix THS3014 4 Channel 100 MHz Handheld Oscilloscope 2.5 GSa/s

Tektronix TDS5054B 4 Channel 500 MHz Digital Oscilloscope 5 GSa/s

Tektronix TDS5052B 2 Channel 500 MHz Digital Oscilloscope 5 GSa/s

Tektronix TDS5032B 2 Channel 350 MHz Digital Oscilloscope 5 GSa/s

Tektronix TDS3054B 4 Channel 500 MHz Digital Oscilloscope 5 GSa/s

Tektronix TDS3052B 2 Channel 500 MHz Digital Oscilloscope 5 GSa/s

Tektronix TDS3044B 4 Channel 400 MHz Digital Oscilloscope 5 GSa/s

Tektronix TDS3034B 4 Channel 300 MHz Digital Oscilloscope 2.5 GSa/s

Tektronix TDS3032B 2 Channel 300 MHz Digital Oscilloscope 2.5 GSa/s

Tektronix TDS3024B 4 Channel 200 MHz Digital Oscilloscope 2.5 GSa/s

Tektronix TDS3014B 4 Channel 100 MHz Digital Oscilloscope 1.25 GSa/s

Tektronix TDS3012B 2 Channel 100 MHz Digital Oscilloscope 1.25 GSa/s

Tektronix TDS794D 4 Channel 2 GHz Digital Oscilloscope 4 GSa/s

Tektronix TDS 744A 4 Channel 500 MHz Digital Oscilloscope 2GSa/s

Tektronix MSO4104 4 Channel 1 GHz Oscilloscope 2.5 GSa/s

Tektronix MSO4054 4 Channel 500 MHz Oscilloscope 2.5 GSa/s

View all

MAXIM INSTRUMENTS