|
POWER (fundamental), CW, @ OUTPUT CONNECTOR
|
|
Nominal
|
40 watts
|
|
Minimum
|
15 watts, 10 watts in low harmonic mode
|
|
Linear @ 1dB Compression
|
7 watts minimum
|
|
FLATNESS
|
9 dB maximum, 4.2 - 18 GHz
±5 dB maximum, 8.0 - 18 GHz
|
|
FREQUENCY RESPONSE
|
4.2-18 GHz instantaneously or one of three selectable sub-bands in low harmonic mode
|
|
INPUT FOR RATED OUTPUT
|
1.0 milliwatt maximum
|
|
GAIN (at maximum setting)
|
41 dB minimum
|
|
GAIN ADJUSTMENT (continuous range)
|
35 dB minimum
|
|
INPUT IMPEDANCE
|
50 ohms, VSWR 2.0:1 maximum
|
|
OUTPUT IMPEDANCE
|
50 ohms, VSWR 2.5:1 typical
|
|
MISMATCH TOLERANCE
|
Output power foldback protection at reflected power exceeding 20 watts (10 watts in low harmonic mode). Will operate without damage or oscillation with any magnitude and phase of source and load impedance. May oscillate with unshielded open due to coupling to input. Should not be tested with connector off.
|
|
MODULATION CAPABILITY
|
Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal. AM peak envelope power limited to specified power.
|
|
NOISE POWER DENSITY
|
Minus 80 dBm/Hz (maximum)
Minus 90 dBm/Hz (typical)
|
|
HARMONIC DISTORTION (in user selectable sub-band at 10 watts)
|
Minus 20 dBc maximum
Minus 30 dBc typical
|
|
HARMONIC DISTORTION (full band at 15 watts)
|
4.2-4.5 GHz; Minus 0 dBc maximum, Minus 1 dBc typical
4.5-5.0 GHz; Minus 1 dBc maximum, Minus 2 dBc typical
5.0-7.0 GHz; Minus 2.5 dBc maximum, Minus 4 dBc typical
7.0-10.0 GHz; Minus 5 dBc maximum, Minus 9 dBc typical
10.0-12.0 GHz; Minus 8 dBc maximum, Minus 12 dBc typical
Above 12 GHz; Minus 20 dBc maximum, Minus 30 dBc typical
|
|
PRIMARY POWER
|
99-260 VAC
50/60 Hz single phase
600 VAC maximum
|
|
CONNECTORS
|
|
RF input
|
Type N precision female on rear panel
|
|
RF output
|
Type N precision female on rear panel
|
|
RF output sample port
|
Type N precision female on rear panel
|
|
GPIB
|
IEEE-488 (f)
|
|
Interlock
|
DB-15 female on rear panel
|
|
COOLING
|
Forced air (self contained fans), air entry and exit in rear.
|
|
SIZE (W x H x D)
|
50.3 x 16.5 x 68.6 cm, 19.8 x 6.5 x 27 in.
|
|
WEIGHT (approximate)
|
32 kg, 70 lbs.
|
![](javascript:addcart({"pid":914,"pname":"Rohde & Schwarz BBA150-series Broadband Amplifiers 4 kHz - 6 GHz up to 3000W","image":"/uploads/2019/04/rs_bba150.png"})){kind=link}
![](javascript:addcart({"pid":913,"pname":"Rohde & Schwarz BBA130-series Broadband Amplifiers 80 MHz - 6 GHz up to 4200W","image":"/uploads/2019/04/rs_bba130.png"})){kind=link}
![](javascript:addcart({"pid":1416,"pname":"Teseq CBA 6G-120B Broadband Amplifier 1.8 GHz - 6 GHz 120W","image":"/uploads/2018/01/teseq_cba_6g-120b.png"})){kind=link}
![](javascript:addcart({"pid":1415,"pname":"Teseq CBA 6G-080B Broadband Amplifier 1.8 GHz - 6 GHz 80W","image":"/uploads/2018/01/teseq_cba_6g-080b.png"})){kind=link}
![](javascript:addcart({"pid":1414,"pname":"Teseq CBA 6G-040B Broadband Amplifier 1.8 GHz - 6 GHz 40W","image":"/uploads/2018/01/teseq_cba_6g-040b.png"})){kind=link}
![](javascript:addcart({"pid":1413,"pname":"Teseq CBA 3G-500B Broadband Amplifier 800 MHz - 3.1 GHz 500W","image":"/uploads/2018/01/Image_Placeholder.png"})){kind=link}
![](javascript:addcart({"pid":1412,"pname":"Teseq CBA 3G-300B Broadband Amplifier 800 MHz - 3.1 GHz 300W","image":"/uploads/2018/01/teseq_cba_3g-300b.png"})){kind=link}
![](javascript:addcart({"pid":1411,"pname":"Teseq CBA 3G-100B Broadband Amplifier 800 MHz - 3.1 GHz 100W","image":"/uploads/2018/01/teseq_cba_3g-100b.png"})){kind=link}
![](javascript:addcart({"pid":1410,"pname":"Teseq CBA 3G-050B Broadband Amplifier 800 MHz - 3.1 GHz 50W","image":"/uploads/2018/01/Teseq_cba_3g-050b.png"})){kind=link}