RATED POWER OUTPUT
|
2500W, 10 kHz-100 MHz
2500-1900W, 100 MHz-225 MHz (derating slope of 4.8W/MHz)
|
INPUT FOR RATED OUTPUT
|
1.0 milliwatt maximum
|
POWER OUTPUT @ 1dB compression
|
2000W, 10 kHz-100 MHz
2000-1200W. 100 MHz-225 MHz (derating slope of 6.4W/MHz)
|
FLATNESS
|
±3.0 dB maximum
±1.0 dB with int. leveling
|
FREQUENCY RESPONSE
|
10 kHz-225 MHz instantaneously
|
GAIN (at maximum setting)
|
64 dB minimum
|
GAIN ADJUSTMENT (Continuous Range)
|
20 dB minimum
|
INPUT IMPEDANCE
|
50 ohms, VSWR 1.5:1 maximum
|
OUTPUT IMPEDANCE
|
50 ohms, nominal
|
MISMATCH TOLERANCE
|
100% of rated power without foldback up to 6.0:1 mismatch, above which may limit 1250W reflected power. Will operate without damage or oscillation with any magnitude and phase of source and load impedance.
|
MODULATION CAPABILITY
|
Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
|
HARMONIC DISTORTION
|
Minus 20 dBc maximum at 1800 watts
|
RF POWER DISPLAY
|
0-3000 watts full scale
|
RISE TIME/FALL TIME
|
10 nanoseconds maximum
|
PRIMARY POWER (User must specify)
|
187-264 VAC Delta (4-wire)
365-528 VAC Wye (5-wire)
47-63 Hz, three phase
10,000 watts maximum
|
CONNECTORS
|
RF input
|
Type N female, rear panel
|
RF output
|
Type 7-16 DIN female, rear panel
|
Forward Sample
|
BNC female on front panel
|
Reverse Sample
|
BNC female on front panel
|
Safety Interlock
|
15 pin female Type D on rear panel
|
Remote Control
|
24-pin Female GPIB/IEEE-488, 9-pin RS-232 and USB on rear panel
|
Remote control (fiber optic)
|
ST Connector, Tx and Rx RS-232
|
IEEE-488 (GPIB) & RS-232 INTERFACE
|
Allows control of all amplifier functions and monitoring of all status indications via standard GPIB/IEEE-488 or RS-232 commands
|
COOLING
|
Forced air (self contained fans)
|
SIZE (W x H x D)
|
56.1 x 109.2 x 88.9 cm, 22.1 x 43 x 35 in.
|
WEIGHT
|
159 kg (350 lb)
|