| Frequency Response |
DC - 150 kHz (1 watt): +0.0 to -3.0 dB |
| 8-Ohm Power Response (continuous duty) |
DC to 60 kHz |
± 65 Vpk |
| DC to 200 kHz |
± 37 Vpk |
| DC to 60 kHz |
± 65 Vpk |
| Slew Rate |
>40 V/µSec |
| Residual Noise |
10 Hz to 22 kHz |
<190 µV (0.19 mV) |
| 10 Hz to 500 kHz |
<550 µV (0.55 mV) |
| Signal-to-Noise Ratio |
10 Hz - 22 kHz |
-105 dB |
| 10 Hz - 500 kHz |
-95 dB |
| THD (DC - 50 kHz) |
less than 0.5% |
| DC Offset |
Less than ±10 mV |
| DC Drift (after 1 minute of operation) |
Less than ±200 µV |
| Output Impedance |
10 mOhm in Series with 0.95 µH |
| Phase Response (10 Hz - 10 kHz) |
±6 degrees including 800 nsec propagation delay |
| Input Characteristics |
| Balanced with ground |
Three terminal barrier block connector, 20k ohm differential |
| Balanced with ground |
Back-panel DB-9 connector (pins 1, 2 and 3), 20k ohm differential |
| Unbalanced |
BNC connector, 10k ohm single ended |
| Gain (variable or fixed) |
Voltage Mode |
10 volts/volt |
| Current Mode |
5 amperes/volt |
| Gain Linearity (over input signal, from 0.2V to 5V) |
AC |
0.05% |
| DC |
0.025% |
| Max Input Voltage |
±10V, balanced or unbalanced |
| Physical Characteristics |
| AC Power |
Single phase, 120 VAC, 60 Hz |
| Operating Temperature |
10°C to 50°C (50°F to 122°F), maximum output Power de-rated above 30°C (86°F). |
| Weight |
20 lbs. (9.1 kg) |
| Dimensions |
9.5“ x 22.75“ x 3.5“ (24.1 cm x 57.8 cm x 8.9 cm) |