DetailsMaxim

California Instruments 15001iX AC Power Source 15kVA

The iX Series II represents a new generation of AC and DC power source that addresses increasing demands on test equipment to perform more functions at a lower cost. By combining a flexible AC/DC power source with a high performance power analyzer, the iX Series II systems are capable of handling complex applications that have traditionally required multiple instruments.

The sleek integrated approach of the iX Series II avoids the cable clutter that is commonly found in AC test systems. The i/iX Series II is rack mountable with a 4U chassis design. All connections are made internally and the need for external digital multimeters, power harmonics analyzer and current shunts or clamps is completely eliminated. Using a state of the art digital signal processor in conjunction with precision high resolution A/D converters, the iX Series II provides more accuracy and resolution than can be found in some dedicated harmonic power analyzers. Since many components in the iX Series II are shared between the AC/DC source and the power analyzer, the total cost of the integrated system is less than the typical cost of a multiple unit system.

For less demanding applications, the Compact iX Series provides similar output and transient capabilities as the iX Series II, as well as basic measurements.

Quantity:

Feature Specification

3000 VA to 15000 VA of AC Output Power
Combines AC/DC source and power analyzer
Harmonic analysis of Voltage and Current
Programmable Impedance
AC, DC and AC+DC Output Modes
Multiple Chassis Configurations
Powerful output transient generation
High Crest Factor Capability
Arbitrary waveform generation
IEC 61000-3-2 and IEC 61000-3-3

Operating Modes
Model	iX Series II	i Series II
Modes	AC, DC or AC+DC	AC or DC
AC Output Mode
Frequency	Range: 16.00-1000 Hz (Note: Voltage on 300 V range derates from 300 Vrms max at 500 Hz to 150 Vrms max at 1000 Hz; See V-F rating chart. below)
Total Power	3001i/iX: 3000 VA, 5001i/iX: 5000 VA, 9003i/iX: 3000 VA 3ø, with mode iX: 9000 VA 1ø, 10001i/iX: 10000 VA, 15001i/iX: 15000 VA, 15003i/iX: 5000 VA/ø 3ø, with mode iX: 15000 VA/ø 1ø
Load Power Factor	0 to unity at full output VA
AC Voltage Mode
Voltage Ranges Output Noise (20 kHz to 1 MHz)	Range	VLow	VHigh
AC	0-150 V	0-300 V
AC+DC	0-150 V	0-300 V
Load Regulation (with ALC on)	< 0.2%
Load Regulation (with ALC off)	< 0.5% DC to 100 Hz, < 0.6% 100 Hz to 500 Hz in high voltage range, < 2.2% 100 Hz to 500 Hz in low voltage range, < 3% 500 Hz to 1000 Hz
Line Regulation	< 0.1% for 10% line change
< 250 mVrms typ., < 500 mVrms max.
Harmonic Distortion (Linear)	< 1% from 16 - 66 Hz, < 2% at 400 Hz, < 3% at 800 Hz (Full resistive load)
DC Offset	< 20 mV External Amplitude Modulation: Depth: 0 - 10 %, Frequency: DC - 2 KHz
Isolation Voltage	300 Vrms output to chassis
AC Mode Current
Model	Model	3001 i/iX	5001 i/iX	9003 i/iX 3ø
Steady State AC Current	300 V range	11.1	18.5	11.1 /ø
	150 V range	22.2	37.0	22.2 /ø
Note: Constant power mode provides increased current at reduced voltage (See chart below)
Model	Model	10001 i/iX	15001 i/iX	15003 i/iX 3ø
Steady State AC Current	300 V range	37.0	55.5	18.5 /ø
	150 V range	74.0	111.0	37.0 /ø
Note: Constant power mode provides increased current at reduced voltage (See chart below)
Model	Model	3001 i/iX	5001 i/iX	9003 i/iX 3ø
Peak Repetitive AC Current	High range	96.0	96.0	96.0 /ø
	Low range	110.0	110.0	110.0 /ø
Model	Model	10001 i/iX	15001 i/iX	15003 i/iX 3ø
Peak Repetitive AC Current	High range	192.0	288.0	96.0 /ø
	Low range	220.0	330.0	110.0 /ø
Programming Accuracy	Voltage (rms): ± 0.2 of range, 16 to 1000 Hz, Frequency: ± 0.01 % of programmed value, Current Limit: ± 0.5 % of programmed value, Phase: < 1.5° with balanced load at 50/60 Hz
Programming Resolution	Voltage (rms): 100 mV, Frequency: 0.01 Hz from 16 - 81.91 Hz, 0.1 Hz from 82.0 - 819.1 Hz, 1 Hz from 820-1000 Hz, Current Limit: 0.1 A, Phase, 0.1°
Output Relay	Push-button controlled or bus controlled output relay
Output Impedance (iX Only)	Programmable Z on 3001iX, 5001iX, 9003iX and 15003iX (3ø mode only) for 50 Hz fundamental
Resistive	Range: 17 - 1000 mOhm,resolution: 4 mOhm accuracy, 2 % FS
Inductive	Range: 230 - 1000 μH, resolution: 4 μH, accuracy: 2 % FS
Measurements - Standard (AC Measurements)
Parameter	Frequency	RMS Voltage	RMS Current	Peak Current
Range	16-500 Hz	0-300 V	0-40 A	0-120 A
Accuracy* (±) 0.01% + 0.01 Hz	< 100 Hz 100 - 500 Hz	0.5 V + 0.02% 0.1 V + 0.02%	0.5 A + 0.02% 0.1 A + 0.02%	0.5 A + 0.02% 0.1 A + 0.02%
Resolution*	0.01 Hz	10 mV	1 mA	1 mA
Parameter	Crest Factor	Real Power	Apparent Pwr	Pwr Factor
Range	0.00-6.00	0-6 kW	0-6 kVA	0.00-1.00
Accuracy* (±) 0.01% + 0.01 Hz	0.05 0.05	10 W + 0.1% 20 W + 0.1%	10 VA + 0.1% 20 VA + 0.1%	0.01 0.02
Resolution*	0.01	1 W	1 VA	0.01
Parameter	DC Voltage	DC Current	Power
Voltage Ranges	0-300 V	0-40 A	0-6 kW
Accuracy* (±) 0.01% + 0.01 Hz	150 mV 150 mV	70 mA 70 mA	15 W 15 W
Resolution*	10 mV	1 mA	1 W
* Measurement system bandwidth = DC to 48 kHz. Accuracy specifications are valid above 100 counts. Current and Power Accuracy specifications are times two for 10001i/iX /30003i/iX and times three for 15001i/iX and 9003i/iX and 15003i/iX with MODE-iX option when in single phase mode. For 10001i/iX, 15001i/iX and 30003i/ iX, resolution decreases by factor of 10, ranges for current and power increases by factor of three. PF accuracy applies for PF > 0.5 and VA > 50% of range.
Measurements - Harmonics
Parameter	Frequency Fundamental Harmonics	Phase	Voltage	Current
Range	16.00-500.0 Hz / 32.00 Hz - 48.00 kHz	0.0 - 360.0°	Fundamental Harmonics 2 - 50	Fundamental Harmonics 2 - 50
Accuracy* (±)	0.01% + 0.01 Hz	2° typ.	250 mV 0.1% + 250 mV+0.1% /1 kHz	50 mA/0.1% + 50 mA +0.1% /1 kHz
Resolution	0.01 Hz	0.5°	10 mV / 10 mV	10 mA / 10 mA
* Accuracy specifications are valid above 100 counts. Accuracy specifications are times three for three phase mode. Harmonics frequency range in three phase mode is 32 Hz - 16 kHz. Resolution decreases by factor of 10 for 9003iX and 15003iX with Mode-iX option in 1 phase mode and for 10001iX, 15001iX and 30003i/iX.
DC Mode Output
Power (Max at full scale of DC Voltage Range)	3001i/iX: 2100 W, 5001i/iX: 3500 W, 9003i/iX: 2100 W/ø 3ø, 6300 W/ø 1ø, 10001i/iX: 7000 W, 15001i/iX: 10500 W, 15003i/iX: 3500 W/ø 3ø, 10500 W/ø 1ø
Voltage Ranges	Range: Low: 200 Vdc, High: 400 Vdc
Line Regulation	< 0.1% FS or 10% line change
Output Noise	< 250 mV rms typ., < 500 mV rms max., (20 kHz to 1 MHz)
Max DC Current (Maximum current at 65% of V Range)
Model	3001 i/iX	5001 i/iX	9003 i/iX	9003 i/iX 3ø
400V range	7.8	13	23.4	7.8
200V range	15.6	26	46.8	15.6
Model	10001 i/iX	15001 i/iX	15003 i/iX 3ø
400V range	26	39	13
200V range	52	78	26
Current Limit	Programmable from 0 A to maximum current for selected range
AC+DC Mode Output
Output Power (iX only)	Full AC Power if DC component is less than 20% of full scale voltage, Full DC power if DC component is above 20%
Storage
Non Volatile Mem. storage	16 instrument setups, 200 user defined waveforms
Waveforms
Waveform Types	i Series II: Sine, iX Series II: Sine, Square, Clipped sine, User defined
User defined waveform storage	Four groups of 50 user defined arbitrary waveforms of 1024 points for a total of 200 (One group can be active at a time)
System Interface
Inputs	Remote shutdown, External Sync, Clock/Lock (option)
Outputs	Function Strobe, Clock/Lock (option)
Protection
Over Load	Constant Current or Constant Voltage mode
Over Temperature	Automatic shutdown
Remote Control
IEEE-488 Interface	IEEE-488 (GPIB) talker listener. Subset: AH1, C0, DC1, DT1, L3, PP0, RL2, SH1, SR1, T6, IEEE-488.2 SCPI Syntax
RS232C Interface	9 pin D-shell connector, Handshake: CTS, RTS, Data bits: 7,8, Stop bits: 1, 2, Baud rate: 9600, 19200, 38400, 57600, 115200, IEEE-488.2 SCPI Syntax (Supplied with RS232C cable)
DC Mode Output
Voltage	3001 and 9003: 208-240 ± 10% Vac, (L-N, 1ø), All other models: Standard: 208-240 ± 10% Vac, (L-L, 3ø), Option -400: 400-480 ± 10% Vac, (L-L, 3ø) (Input range must be specified when ordering)
Max DC Current (Maximum current at 65% of V Range)
Model	3001i/iX	5001i/iX	9003i/iX
187-264V	25 A	23 A	75 A
360-528V	N/A	12 A	N/A
Model	10001 i/iX	15001 i/iX	15003 i/iX 3ø
187-264V	46 A	69 A	69 A
360-528V	24 A	36 A	36 A
Inrush Current per chassis	< 100 Apk for 100 μs at 208-240 V, < 50 Apk for 100 μs at 400-480 V
Line Frequency	50-60 Hz ± 10 %
Efficiency	75% typical
Power Factor	0.6 typical
AC Service
Regulatory	IEC61010, EN50081-2, EN50082-2, CE EMC and Safety Mark requirements
RFI Suppression	CISPR 11, Group1 , Class A
Rear Panel Connectors	AC Input & Output terminal block with cover, IEEE-488 (GPIB) connector (rear panel), 9 pin D-Shell RS232C connector, Remote voltage sense terminal block, System Interface Connector, RS232 DB9 to DB9 cable supplied
Physical Dimensions
Dimensions	Height: 7” (178 mm), Width: 19” (483 mm), Depth: 24” (610 mm) (depth includes rear panel connectors)
Weight	per 5001i/iX Chassis: Net: 61 lbs / 28 Kg, Shipping: 115 lbs / 52 Kg
Vibration and Shock	Designed to meet NSTA project 1A transportation levels
Air Intake/Exhaust	Forced air cooling, side air intake, rear exhaust.
Operating Humidity	0 to 95 % RAH, non condensing.
Temperature	Operating: 0 to 40° C, Storage: -20 to +85° C

California Instruments 15001iX AC Power Source 15kVA

Related Products

Rohde & Schwarz HM7042-5 Triple power supply 32V 5A 155.5W

EM TEST RDS 200N Auxiliary DC Voltage Source

EM TEST NetWave 108.3 (3-Phase) AC/DC Power Source

EM TEST NetWave 90.2 (3-Phase) AC/DC Power Source

EM TEST NetWave 67.3 (3-Phase) AC/DC Power Source

EM TEST NetWave 67.2 (3-Phase) AC/DC Power Source

EM TEST NetWave 67 (3-Phase) AC/DC Power Source

EM TEST NetWave 30.3 (3-Phase) AC/DC Power Source

View all

MAXIM INSTRUMENTS