POWER (fundamental), CW, @ OUTPUT CONNECTOR
|
Nominal
|
267 watts
|
Minimum
|
200 watts
|
Linear @ 1dB Compression
|
100 watts minimum
|
FLATNESS
|
±12 dB maximum, equalized for ±5 dB maximum rated power
|
FREQUENCY RESPONSE
|
2.5-7.5 GHz instantaneously
|
INPUT FOR RATED OUTPUT
|
1.0 milliwatt maximum
|
GAIN (at maximum setting)
|
53 dB minimum
|
GAIN ADJUSTMENT (continuous range)
|
35 dB minimum
|
INPUT IMPEDANCE
|
50 ohms, VSWR 2.0:1 maximum
|
OUTPUT IMPEDANCE
|
50 ohms, VSWR 2.5:1 typical
|
MISMATCH TOLERANCE
|
Output power foldback protection at reflected power exceeding 40 watts. Will operate without damage or oscillation with any magnitude and phase of source and load impedance. May oscillate with unshielded open due to coupling to input. Should not be tested with connector off.
|
MODULATION CAPABILITY
|
Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal. AM peak envelope power limited to specified power.
|
VIDEO PULSE CAPABILITY
|
Pulse Width:
|
0.05 microseconds min
|
Pulse Rate (PRF):
|
100 kHz max
|
RF Rise and Fall:
|
30 ns max (10% to 90%)
|
Delay:
|
300 ns max from pulse input to RF 90%
|
Pulse width distortion:
|
30 ns max (50% points of output pulse width compared to 50% points of input pulse width)
|
NOISE POWER DENSITY
|
Pulse On
|
Minus 69 dBm/Hz (maximum)
Minus 72 dBm/Hz (typical)
|
Pulse off
|
Minus 140 dBm/Hz (typical)
|
HARMONIC DISTORTION
|
Minus 2.0 dBc maximum
Minus 3.5 dBc typical
|
PRIMARY POWER
|
190-260 VAC
50/60 Hz single phase
2 kVA maximum
|
CONNECTORS
|
RF input
|
Type N female on rear panel
|
RF output
|
Type N female on rear panel
|
RF output sample port
|
Type N female on rear panel
|
GPIB
|
IEEE-488 (f)on rear panel
|
Interlock
|
DB-15 (f) on rear panel
|
Video
|
BNC female on rear panel
|
COOLING
|
Forced air (self contained fans), air entry and exit in rear.
|
SIZE (W x H x D)
|
50.3 x 29.7 x 68.6 cm, 19.8 x 11.7 x 27 in.
|
WEIGHT (approximate)
|
54 kg, 120 lbs.
|