|
POWER (fundamental), CW, @ OUTPUT FLANGE
|
|
Nominal
|
300 watts
|
|
Minimum
|
250 watts
|
|
Linear @ 1dB Compression
|
70 watts minimum
|
|
FLATNESS
|
±12 dB maximum, equalized for ±5 dB maximum rated power
|
|
FREQUENCY RESPONSE
|
7.5-18 GHz instantaneously
|
|
INPUT FOR RATED OUTPUT
|
1.0 milliwatt maximum
|
|
GAIN (at maximum setting)
|
54 dB minimum
|
|
GAIN ADJUSTMENT (continuous range)
|
35 dB minimum
|
|
INPUT IMPEDANCE
|
50 ohms, VSWR 2.0:1 maximum
|
|
OUTPUT IMPEDANCE
|
50 ohms, VSWR 2.5:1 typical
|
|
MISMATCH TOLERANCE
|
Output power foldback protection at reflected power exceeding 50 watts. Will operate without damage or oscillation with any magnitude and phase of source and load impedance. May oscillate with unshielded open due to coupling to input. Should not be tested with connector off.
|
|
MODULATION CAPABILITY
|
Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal. AM peak envelope power limited to specified power.
|
|
VIDEO PULSE CAPABILITY
|
|
Pulse Width:
|
0.05 microseconds min
|
|
Pulse Rate (PRF):
|
100 kHz max
|
|
RF Rise and Fall:
|
30 ns max (10% to 90%)
|
|
Delay:
|
300 ns max from pulse input to RF 90%
|
|
Pulse width distortion:
|
±30 ns max (50% points of output pulse width compared to 50% points of input pulse width)
|
|
NOISE POWER DENSITY
|
|
Pulse On
|
Minus 70 dBm/Hz (maximum)
Minus 72 dBm/Hz (typical)
|
|
Pulse off
|
Minus 140 dBm/Hz (typical)
|
|
HARMONIC DISTORTION
|
Below 10 GHz, minus 5 dBc max., minus 7 dBc typ.
10-12 GHz, minus 8 dBc max., minus 12 dBc typ.
Above 12 GHz, minus 20 dBc max., minus 30 dBc typ.
|
|
PRIMARY POWER
|
190-260 VAC
50/60 Hz single phase
2.5 kVA maximum
|
|
CONNECTORS
|
|
RF input
|
Type N female on rear panel
|
|
RF output
|
TypeWRD-750D24 waveguide flange on rear panel
|
|
RF output sample port
|
Type N female on rear panel
|
|
GPIB
|
IEEE-488 (f) on rear panel
|
|
Interlock
|
DB-15 female on rear panel
|
|
Video
|
BNC female on rear panel
|
|
COOLING
|
Forced air (self contained fans), air entry and exit in rear.
|
|
SIZE (W x H x D)
|
50.3 x 29.7 x 68.6 cm, 19.8 x 11.7 x 27 in.
|
|
WEIGHT (approximate)
|
53 kg, 115 lbs.
|
![](javascript:addcart({"pid":914,"pname":"Rohde & Schwarz BBA150-series Broadband Amplifiers 4 kHz - 6 GHz up to 3000W","image":"/uploads/2019/04/rs_bba150.png"})){kind=link}
![](javascript:addcart({"pid":913,"pname":"Rohde & Schwarz BBA130-series Broadband Amplifiers 80 MHz - 6 GHz up to 4200W","image":"/uploads/2019/04/rs_bba130.png"})){kind=link}
![](javascript:addcart({"pid":40,"pname":"AE Techron 7220-series EMC Amplifiers DC - 1 MHz 1000W","image":"/uploads/2019/02/ae_techron_7220-series.png"})){kind=link}
![](javascript:addcart({"pid":39,"pname":"AE Techron 7136 High-speed AC/DC Amplifier","image":"/uploads/2019/02/ae_techron_7136.png"})){kind=link}
![](javascript:addcart({"pid":38,"pname":"AE Techron 7114 High-speed AC/DC Amplifier","image":"/uploads/2019/02/ae_techron_7114.png"})){kind=link}
![](javascript:addcart({"pid":36,"pname":"AE Techron 7100-series High-Speed AC/DC Amplifiers","image":"/uploads/2019/02/ae_techron_7100-series.png"})){kind=link}
![](javascript:addcart({"pid":1416,"pname":"Teseq CBA 6G-120B Broadband Amplifier 1.8 GHz - 6 GHz 120W","image":"/uploads/2018/01/teseq_cba_6g-120b.png"})){kind=link}
![](javascript:addcart({"pid":1415,"pname":"Teseq CBA 6G-080B Broadband Amplifier 1.8 GHz - 6 GHz 80W","image":"/uploads/2018/01/teseq_cba_6g-080b.png"})){kind=link}
![](javascript:addcart({"pid":1414,"pname":"Teseq CBA 6G-040B Broadband Amplifier 1.8 GHz - 6 GHz 40W","image":"/uploads/2018/01/teseq_cba_6g-040b.png"})){kind=link}
![](javascript:addcart({"pid":1413,"pname":"Teseq CBA 3G-500B Broadband Amplifier 800 MHz - 3.1 GHz 500W","image":"/uploads/2018/01/Image_Placeholder.png"})){kind=link}
![](javascript:addcart({"pid":1412,"pname":"Teseq CBA 3G-300B Broadband Amplifier 800 MHz - 3.1 GHz 300W","image":"/uploads/2018/01/teseq_cba_3g-300b.png"})){kind=link}