| TECHNICAL DETAILS |
| OUTPUT |
| RF output |
N connector at the front panel |
| Output power |
Built-in amplifier 110 W (nominal) |
| Gain amplifier |
> 50 dB |
| Output impedance |
50 ohm |
| Harmonic distortion |
< -20 dBc at max. power |
| Insertion loss |
Approx. 1 dB (directional coupler + RF relay) |
| SIGNAL GENERATOR |
| Output level |
-63.5 dBm to 0 dBm |
| Frequency range |
4 kHz to 1 GHz |
| Output impedance |
50 ohm |
| Direct RF output |
To control an external amplifier |
| TEST FREQUENCIES |
| Frequency range |
4 kHz* - 400 MHz (built-in amplifier)
4 kHz* - 1,000 MHz (ext. amplifier) |
| Unmodulated signal |
CW (continuous wave) |
| Amplitude modulation |
Frequency: 1 Hz to 3,000 Hz, Index: 1% to 95%, |
| Pulse modulation |
Frequency: 1 Hz to 3,000 Hz Index: 10% to 80% |
| * |
4 kHz with optional IMNS1-CWS
Impedance matching network, otherwise 9 kHz to 1 GHz |
| DUAL DIRECTIONAL COUPLER |
| Dual directional coupler |
Included to measure forward power and reverse power |
| Frequency range |
4 kHz* to 1 GHz |
| Power |
200 W max. |
| Insertion loss |
0.6 dB max. |
| Mainline VSWR |
1.1:1 max. |
| MEASUREMENT |
| PM 1000.1 |
3-channel power meter 4 kHz to 1 GHz |
| Forward power |
Internal power meter #1, -10 dBm to +52 dBm |
| Reverse power |
Internal power meter #2, -10 dBm to +52 dBm |
| Injected current (Monitor) |
Internal power meter #3, -45 dBm to +13 dBm |
| TIME PARAMETERS |
| Dwell time |
td = 0.3 s - 9,999 s |
| Pause time |
tr = 0/0.3 s - 9,999 s |
| INTERFACE |
| Serial interface |
USB |
| Parallel interface |
IEEE 488, addresses 1 - 30 |
| Fail 1 |
BNC input; test will be stopped (active low) |
| Fail 2 |
BNC input; test status will be saved (max. 10 events) when active low. Test continues |
| GENERAL DATA |
| Dimensions, weight |
19""/6 HU, 31.6 kg |
| Supply voltage |
115 V or 230 V +10/-15 %, 50/60 Hz |
| Input power |
Max. 1430 W Inrush |
| Power factor |
cos(phi) = 0.96 at max. output power as per IEC 555 |
| Fuses |
2x6.3 AT (115 V) or 2x6.3 AT (230 V) |